fuel pump location L322

landrovered

Well-known member
Nov 28, 2006
4,289
0
Located in the tank on the right side, cover looks like this.
 
Last edited:

landrovered

Well-known member
Nov 28, 2006
4,289
0
It is between the D pillars between the seats and the spare best I can tell from the drawings in RAVE.

The manual says you have to take the trim off the D pillars and then you roll the carpet back to expose the access covers.
 

lforgue8

Well-known member
Jul 23, 2006
1,216
0
MA
landrovered said:
It is between the D pillars between the seats and the spare best I can tell from the drawings in RAVE.

The manual says you have to take the trim off the D pillars and then you roll the carpet back to expose the access covers.

YUP....... WHATS WORNG WITH IT?
 

LRNationals

Well-known member
Mar 20, 2005
625
0
it quit running and i figure that the pump is shot. there is no preasure at the spill rail. anyway. the seats had to come out in order to remove the carpet properlly. i guess there is a special tool required to remove the push on fuel lines? i just broke the nipples off to get the pump out. but the broken peices are still in the snap ends.
 

lforgue8

Well-known member
Jul 23, 2006
1,216
0
MA
LRNationals said:
it quit running and i figure that the pump is shot. there is no preasure at the spill rail. anyway. the seats had to come out in order to remove the carpet properlly. i guess there is a special tool required to remove the push on fuel lines? i just broke the nipples off to get the pump out. but the broken peices are still in the snap ends.

most likely pump......new pump comes with clip that was broken....also need to watch out for the orings that go to the jet pump for the other side of the "saddle" of the tank make sure they dont get dislodged or kinked when reinstalling the hoses..youll know what im talking about when you look at it

good luck
 

LRNationals

Well-known member
Mar 20, 2005
625
0
so thats what that is called a jet pump. in my anger i ripped the fuel pump and the jet pump out all out through the same hole. i hope i didnt screw both pumps up. i guess ill see when it comes time to reinstall it. weird unit. both pumps have floats on them.
 

lforgue8

Well-known member
Jul 23, 2006
1,216
0
MA
LRNationals said:
so thats what that is called a jet pump. in my anger i ripped the fuel pump and the jet pump out all out through the same hole. i hope i didnt screw both pumps up. i guess ill see when it comes time to reinstall it. weird unit. both pumps have floats on them.

The ecu reads both and then calculates the "realtime" fuel level based on the reading from both senders.....

the jet pump assem will need to go back in (through its own access hole) and clipped in place at the bottom of the tank and the supply hoses ran to the fuel pump side.

like i said take care with the clip and orings for that connection