Hella 500 help

[Scout II]

Ok. I have everything hooked up to my relay. I'm running my yellow wire from my relay to the switch. Now I have to run my green wire and tap into either my low or high beam. Question is which wire to my headlamps are the high or low beam? Thanks for your help.

 

[Scout II]

Also I've got no fogs lights, but I have factory fog wires with a connector. Could I tap into those wires?

 

[enonz98lr]

i taped into the factory fog lights on mine, cuz i ripped them off and put hella 500 fogs on the bull bar insted, i just reused the conector from the old lights

 

[mr_katanga]

if you want to go to the factory fog wires, your rig must already have fogs for the wires to work. Otherwise, you will have to have someone with a rovacom or something reprogram the settings of the computer to indicate that you have fogs. If you don't do that then the wires won't be hot.

 

[Scout II]

Thanks. I'm going to just tap into the red (hot) wire in the headlamp wire so that I can turn my hella's on/off whenever with the switch. Hopefully that should work.