Hood Black out kit

[Mathias Steinbock]

I have seen so many D I with the black out kit. Does anyone have an LR part number for it or possible measurements that it can be replicated for less. I recall a few years back there was a posing with pictures but I can not seem to find it anywhere here.

Thanks Lots

Drive Safe and Sober

 

[SCSL]

You can find one at www.get-rhino.com for $75. vs. Genuine price of an insane $200

 

[RoverDisco98]

Don't know the Land Rover has a part number, but can assure you that if they do it wil cost many $$$$$. Got mine for here, price is right and a quality product. Just remember that the bonnet must be CLEAN and that two people are required to do position the blackout correctly.

http://www.viggdesigns.com/lineup/roverstuff.htm

Frank

 

[peter]

rovertym has them for 60 bucks.

 

[bhoust]

Mathias, food for thought!

Mathias,

I went to a 'Rhino lining' spray in bed liner franchise. Charged me $105+tx. Followed the contour of the hood line. The end result is a little bit over 1/8" thick and tough as nails!! Won't scratch, dent or flake and they guaranteed it for the life of the vehicle.

Regards,

Brian

 

[cptyarderho]

rovertym has them for 60 bucks.

And they look good, I have seen several installed. I went the flat black rattle can route myself, but it does not look quite as good as the vinyl.

 

[landylight]

Hey Brian

Glad to see some one else is insane as i am to put that on your hood. I got abso FLAMED for ita couple weeks ago. I love how it looks and it is rugged.
I also did the rocker panels from the trim line down.
Hope this gives you some alternatives if you so wish to go that road

 

[bhoust]

Adam,

I like it! Especially the rear lower quarter panel. Mine is getting pretty scratched up from the rocks out here.

Looks good, also, any chance you can "retake" the front pic. I have been toying with pulling the front air dam off and see that you have already done so! As I am a coward I would like to see what it looks like before I go to the effort.

Thanks,

Brian

 

[chillywater]

rovertym has them for 60 bucks.

best deal

 

[Roverjoe]

You know if you use a spray solution of soap and water you can move the vinyl around until you take the squeege to it....

 

[rmuller]

You know if you use a spray solution of soap and water you can move the vinyl around until you take the squeege to it....

Yeah thats how Vigg installs them.. also take off the windshield washer nozzles.. be careful with them though, they are pretty brittle..

 

[johnvigg]

disco hood

ViggDesigns will replace any defective blackout for the life of your vehicle when purchased from them
john

 

[rrefx]

Man, hood blackouts really do look awesome.... only problem is I need that glare, the reflection off my hood is all I have to tell when the traffic lights turn green.

 

[JamesWyatt]

Man, hood blackouts really do look awesome.... only problem is I need that glare, the reflection off my hood is all I have to tell when the traffic lights turn green.

I can still see the traffic light reflections in mine.

 

[cptyarderho]

just add eough lift to make them almost eye level.

 

[landylight]

Brian,

Not sure if this is the pic you want but here is the front whilst in the middle of the trim job. Just do it man , i found that doing it with a razor was easyier than dealing with melting plastic from sawzall or jig saw. Make sure its a brand new blade and it will go through it like butter.
Hope this helps

 

[Chris Hyde]

I have seen so many D I with the black out kit. Does anyone have an LR part number for it or possible measurements that it can be replicated for less. I recall a few years back there was a posing with pictures but I can not seem to find it anywhere here.

Thanks Lots

Drive Safe and Sober

Hello Sir. I am the owner of Signs Over Georgia and I sell these D1&D2 Hood Blackout kits in flat black. My price is $58.99 plus shipping.

 

[D Chapman]

Hello Sir. I am the owner of Signs Over Georgia and I sell these D1&D2 Hood Blackout kits in flat black. My price is $58.99 plus shipping.

I thought you had been banned? I would not buy crap from you. Same price, you can get them from RTE....

 

[Bannon88]

Hello Sir. I am the owner of Signs Over Georgia and I sell these D1&D2 Hood Blackout kits in flat black. My price is $58.99 plus shipping.

What we meant to say is...

 

[Marco]

Man, hood blackouts really do look awesome.... only problem is I need that glare, the reflection off my hood is all I have to tell when the traffic lights turn green.

I got a plastic lens at lightinsight.com for $13 and it really works, it's only like 6 or 8 inches long by 1 1/2 wide, now I can even see the traffic lights that are almost over the Disco, great stuff