Land Rover relocation kits

discostew

Well-known member
Sep 14, 2010
7,733
1,024
Northern Illinois
Curious....why relocate it?
The heat from the engine causes the ign module to fail. So they made a bracket to mount the module next to the coil at the fender. Then they give you a pass thru connector that mounts in the modules old location in the distributor and a little harness to connect it all.

Oh shit..I didn't realize that was for a Bosch engine. So the correct answer is "there is no good reason to do that"
 

bamateo

New member
Sep 17, 2023
2
0
USA
The heat from the engine causes the ign module to fail. So they made a bracket to mount the module next to the coil at the fender. Then they give you a pass thru connector that mounts in the modules old location in the distributor and a little harness to connect it all.

Oh shit..I didn't realize that was for a Bosch engine. So the correct answer is "there is no good reason to do that"
Easier access? to swap your cables and coils? no?
 

bamateo

New member
Sep 17, 2023
2
0
USA
Dont you have to remove your intake cover to replace the coils or cables? or at least reach all the way back there... The relocation kit helps make it easier if you have it up front. or is there an easier way to swap the cables back there?
 

discostew

Well-known member
Sep 14, 2010
7,733
1,024
Northern Illinois
Dont you have to remove your intake cover to replace the coils or cables? or at least reach all the way back there... The relocation kit helps make it easier if you have it up front. or is there an easier way to swap the cables back there?
Do you plan to do that weekly? Monthly? I know it’s just my opinion and it’s your truck. But it’s the dumbest thing I’ve seen in a long time