Has anyone seen HD D2 motor mounts anywhere QT doesn't make them any longer and Proud Rhino doesn't stock them either
Looking for HD D2 motor mounts
- Thread starter roverover
- Start date
I have a set of heavy duty mounts very similar to the blacklistedengineering ones (if not the exact same, I don't remember where I bought mine). I had them in for less than a week. So much vibration to the cabin it was awful. I'd sell/give them to you, but really they were awful.
However, I also burn through engine mounts, so one of my longer term projects is to build something similar to above, but with larger, softer material for the bushing. 3/8" of polypropylene is far too little.
Also need similar mounts for the transmission, which are different left-to-right, so that's three different mounts to design... That's why I haven't done it yet.
However, I also burn through engine mounts, so one of my longer term projects is to build something similar to above, but with larger, softer material for the bushing. 3/8" of polypropylene is far too little.
Also need similar mounts for the transmission, which are different left-to-right, so that's three different mounts to design... That's why I haven't done it yet.
I've got the QT mounts, and they are outstanding.
If anyone has a set out of a vehicle, they wouldn't be difficult to replicate.
They do transform apparent throttle response. It's a huge difference in immediacy of torque application.
They're great off-pavement, and certainly around town.
Cheers,
Kennith
If anyone has a set out of a vehicle, they wouldn't be difficult to replicate.
They do transform apparent throttle response. It's a huge difference in immediacy of torque application.
They're great off-pavement, and certainly around town.
Cheers,
Kennith
I have QTs in mine and they are great we have broken other sets, Blacklisted doesn't show any as available. I will probably make up sets but you have to do such volume to make them affordable
I will use the QT as it is a capture setup which makes a lot of sense if the bolt or something were to break
I would love to see your set that vibrates to the cabin I have never noticed any really noticeable vibration with any of the ones we have used..Send me your email and I'll send you a Fedex label
I will use the QT as it is a capture setup which makes a lot of sense if the bolt or something were to break
I would love to see your set that vibrates to the cabin I have never noticed any really noticeable vibration with any of the ones we have used..Send me your email and I'll send you a Fedex label
Didnt Joel use 300tdi mounts in a DII also what abou the Jaguar motor mounts? They are much beefier than the RV8 mount, cheap as well.
https://discoweb.org/showthread.php?t=69483&highlight=jaguar+motor
I put some Jag V8 mounts between the frame rails on the 4.2 and they have been nice, much better than the Rover mounts..
Too bad QT bit the bullet they made good stuff
https://discoweb.org/showthread.php?t=69483&highlight=jaguar+motor
I put some Jag V8 mounts between the frame rails on the 4.2 and they have been nice, much better than the Rover mounts..
Too bad QT bit the bullet they made good stuff
Jag mounts don't work in a D2 as D1 and D2 use different mounts. I did get to thinking about how much work would be involved just to modify or use D1 brackets and mounts on a D2??
He/She also doesn't seem to answer emails/inquiries about the products.
Been waiting 3 months for an answer.
I actually grabbed the last set of Blacklisted mounts just to have a second set. I have been running my first set for many years and they are awesome.
Talk to ballistic. They’d probably make them for you if you send them a set to dimension. You’d probably have to do a minimum buy.
