I am trying to sell off a good bit of my parts collection. All parts (unless otherwise noted) are in Haverford PA 19041 for pick up. Volume discounts, all prices OBO I will not be offended by offers, pick up preferred, shipping is a hastle but I can get it done just not quickly.
Disco I GEMS alternator, New in box genuine, $798.90 from Roversnorth, $375 from me.
Koenig PTO driven winch. Complete, ready to run. $850 (ebay they go for $1200+) Best series rover winch ever made.
Spare PTO for above $200
Old warn M8000 upright (like 8274), needs brake (can be upgraded to 8274 style) and probably a motor rebuild (this style it is the same as a ford starter so they are cheap at NAPA) $225. Includes beat up series bumper with mount for winch.
DI GEMS bare head, need skim $50
1951 Series I parts
Head $200
Misc engine parts call with needs, basically you can take the whole siezed block minus the head for next to nothing.
Starter for core (may work . . .?) $30
Land rover mags 100s, 50 cents each
Two series jump seats, all that is left is the brackets and the frames. $20 each
New front exhaust $40
Brand new bumper galvanized $100
Narrow rear springs, good shape, not sagged, need sanding and paint. $40
Rear axle $150
Front axle complete (should have the rare tracta joints=near unbreakable in a series) $200
Steering box, make offer ???
Have other non-body parts call with requirements
RRC parts
Axle housing, front very, very nice shape, painted includes sway bar mount provisions, fits DI as well $90
Rear axle housing, spring pads rusted, needs paint no sway bar mounts $25
Misc.
109 front axle complete (located in Niagara Falls NY 14305) $80
15in series III wheels, will fit disco I and all series trucks. 4 very nice condition $80
SIII oil pressure gauge $15
Used water pump for serp belt truck (all disco I, 95 RRC, GEMS 4.0/4.6 and I think it fits DII/bosch P38s as well) ~20k on it. $20
Disco I/95 RRC CD changer, needs servo $20
Disco I aux. light harness, genuine, $175 from dealer or RN $50
4.6 cam, very low miles removed to fit aftermarket for 4.6 retrofit to early style dizzy truck, looks perfect, very expensive new $100
4.6 front cover off Disco II $100
DII shocks, stock ~12k on them $20 each
Hi-lift jack 60in model $30
After market DII front brake pads $35
Rear DII pads taper is wrong on one pad $20
Used RRC and DI calipers for cores $20 each
Forgot a big one: 1994 D90 POE aluminium hard top with liftgate, coniston green. Direct retrofit to softtop $2000
D90 front skid plate $100
110 300Tdi rear exhaust new, $100 (probably would fit a 109 with some mods)
4 date correct 1951 wheels $30 each
SIIa/SIII fuel tank replaced bottom $40
Plus anyone is welcome to come over and just root through everything I have to see if there is anything they want.
I will also entertain offers on my 110 dormobile project (located in Niagara Falls) new galvanized chassis, salisbury rear axle, 95 D90 drivetrain, new t-peices, original 1964 dormobile body roof, interior etc. Great project with all the expensive bits already bought.
Don't need the money, just need the space in my house back so I am rationalizing the collection.
Ron evilfij at yahoo.com
Disco I GEMS alternator, New in box genuine, $798.90 from Roversnorth, $375 from me.
Koenig PTO driven winch. Complete, ready to run. $850 (ebay they go for $1200+) Best series rover winch ever made.
Spare PTO for above $200
Old warn M8000 upright (like 8274), needs brake (can be upgraded to 8274 style) and probably a motor rebuild (this style it is the same as a ford starter so they are cheap at NAPA) $225. Includes beat up series bumper with mount for winch.
DI GEMS bare head, need skim $50
1951 Series I parts
Head $200
Misc engine parts call with needs, basically you can take the whole siezed block minus the head for next to nothing.
Starter for core (may work . . .?) $30
Land rover mags 100s, 50 cents each
Two series jump seats, all that is left is the brackets and the frames. $20 each
New front exhaust $40
Brand new bumper galvanized $100
Narrow rear springs, good shape, not sagged, need sanding and paint. $40
Rear axle $150
Front axle complete (should have the rare tracta joints=near unbreakable in a series) $200
Steering box, make offer ???
Have other non-body parts call with requirements
RRC parts
Axle housing, front very, very nice shape, painted includes sway bar mount provisions, fits DI as well $90
Rear axle housing, spring pads rusted, needs paint no sway bar mounts $25
Misc.
109 front axle complete (located in Niagara Falls NY 14305) $80
15in series III wheels, will fit disco I and all series trucks. 4 very nice condition $80
SIII oil pressure gauge $15
Used water pump for serp belt truck (all disco I, 95 RRC, GEMS 4.0/4.6 and I think it fits DII/bosch P38s as well) ~20k on it. $20
Disco I/95 RRC CD changer, needs servo $20
Disco I aux. light harness, genuine, $175 from dealer or RN $50
4.6 cam, very low miles removed to fit aftermarket for 4.6 retrofit to early style dizzy truck, looks perfect, very expensive new $100
4.6 front cover off Disco II $100
DII shocks, stock ~12k on them $20 each
Hi-lift jack 60in model $30
After market DII front brake pads $35
Rear DII pads taper is wrong on one pad $20
Used RRC and DI calipers for cores $20 each
Forgot a big one: 1994 D90 POE aluminium hard top with liftgate, coniston green. Direct retrofit to softtop $2000
D90 front skid plate $100
110 300Tdi rear exhaust new, $100 (probably would fit a 109 with some mods)
4 date correct 1951 wheels $30 each
SIIa/SIII fuel tank replaced bottom $40
Plus anyone is welcome to come over and just root through everything I have to see if there is anything they want.
I will also entertain offers on my 110 dormobile project (located in Niagara Falls) new galvanized chassis, salisbury rear axle, 95 D90 drivetrain, new t-peices, original 1964 dormobile body roof, interior etc. Great project with all the expensive bits already bought.
Don't need the money, just need the space in my house back so I am rationalizing the collection.
Ron evilfij at yahoo.com