Working on a '95 LWB with memory driver's seat. It doesn't work in two positions, back or forward, and rear up and down. When I jump it at the plug in back it works fine in all positions, so there's nothing wrong with the motors. When I activate the switch in the two non-functioning positions I can hear a faint click coming from under the seat (I'm presuming from the memory ECU) but no seat movement, and when I run the self-test it won't function in those same two positions, so I suspect the switch is also okay. I don't know what else to check at this point...could it be the ECU itself, or are there some limit switches that limit the movement at the end of the travel that could be the problem? I'm stumped here...