Need a TJM Part for the T17 or T15

[RoverChic]

I need a peice of black plastic for my T-17. It is the peice that goes above the winch, there two of them. I am missing one of mine. I know this is an odd request but maybe someone out there has one! THANKS!

 

[syoung]

I think I can hook you up- are you sure the T17 has the same plug as the T15 though? I know the DI T17 had a rectangular one that was smaller than the T15... I can't remember if the DII T17 had the same as the DI or ???

 

[RoverChic]

I think I can hook you up- are you sure the T17 has the same plug as the T15 though? I know the DI T17 had a rectangular one that was smaller than the T15... I can't remember if the DII T17 had the same as the DI or ???

WOW! THANKS STEVE! I will check in a little bit, I have to walk down to the garage and swap them out. I thought they were interchangeable though on the D2's. I will swap the one on the T-15 out with the T-17 to make sure they are the same size.

 

[RoverChic]

WOW! THANKS STEVE! I will check in a little bit, I have to walk down to the garage and swap them out. I thought they were interchangeable though on the D2's. I will swap the one on the T-15 out with the T-17 to make sure they are the same size.

Hello Steve, YES it does fit! They are interchangeable! I swapped out the one on my T-17 and it Fit's in the T-15 plugs! Let me know costs, shipping ect! Thanks again!

 

[rmuller]

There are two of them, in a water pit in the Pine Barrens.. If you can find them, you can have them!

Here's a pic of one of them, its in the lower right hand side... unfortunatley I didn't see this pic til after it was too late!

 

[RoverChic]

Heck, I am just glad you two know what I am talking about without a picture! LOL!

 

[syoung]

I'll give you the covers off mine- as long as the steel and aluminium bumpers had the same holes. I'm unpacking it in a few days to send off for powdercoating.