NOT A NEWBIE but stumped. Fob problems.

Frank4

Well-known member
Jul 10, 2012
61
1
Memphis
2000 Discovery bought used with no remote. Was using the key to unlock the door until one day the lock stopped functioning ( key will not turn left or right, key slot ramains at 12 o'clock).

Used keyless entry with fob from the dealer with no problems for a number of years.

I left town for three weeks and the truck sat in the driveway. Got back and the fob would not unlock the truck, light on fob lighting up normally. Alarm light on dash blinking normally ( every three seconds or so). Changed the battery in the fob, no dice.

Called pop a lock and while we were trying to get in ( almost impossible) I pressed the buttons on the fob out of desperation, don't remember what sequence, and the truck unlocked. Got in and the truck started with ZERO hesitation, no car battery issue.

Drove the truck for a couple of days and everything functioned normally. Truck sat for two weeks and when I went to unlock the yesterday it would not work. Dash light blinking normally, fob light illuminating normally. Changed the battery in the fob and still not functioning.

So..... anybody have some experience with this?
 

leshassell

Well-known member
Sep 1, 2008
148
0
Kilgore, TX
Probably two separate issues; if your key won't unlock the door manually, then there is some failure of the lock mechanism inside the door (maybe as simple as the little connecting rod has fallen off). As for the fob, it sounds like the little momentary tactile switches soldered on its circuit board may be on their way out so they're only making contact randomly.
 

jsonova99

Well-known member
Apr 14, 2005
1,683
0
47
Snow Hill, MD
Switch explanation is plausible. You can get key FOB rebuild kits on eBay that come with switches for about $10. I actually just bought two to repair mine. They're shipped straight from China so who knows what to expect, but I'll let you know how mine work out when they arrive
 

messar

Well-known member
Sep 11, 2010
89
0
For the switch repair, I can do this for you for 15$ (shipping included). They are surface mount switches, so a bit tricky to solder.

Matt