Engine is good, transmission is good, many valuable interior pieces. Body, so so. Rear is badly rusted. This truck lived the better part of its life on Nantucket. Let me know what you need.
Parting '95 LWB
- Thread starter Paul Grant
- Start date
How much of the 4.2L do you want? Everything including sensors from the top to the bottom, long block or short block.
I should mention that I have been driving this truck around since last Thursday when it arrived here for parting. The only lights on the dash are the ABS and TC lights. No CEL (and yes, the bulb is still in) nor SRS light.
It's Beluga Black with Sorrel.
The cats are good on the rare LWB y pipe and they are genuine.
I have good but not great speaker grilles.
A nice instrument bezel.
I will be removing the center dash fascia probably today.
A nice black center console.
An AB third row seat in leather.
The ski slope is so so.
Seat ECU has been sold.
Genuine rubber mats have been sold.
Older style left front actuator has been sold.
It's Beluga Black with Sorrel.
The cats are good on the rare LWB y pipe and they are genuine.
I have good but not great speaker grilles.
A nice instrument bezel.
I will be removing the center dash fascia probably today.
A nice black center console.
An AB third row seat in leather.
The ski slope is so so.
Seat ECU has been sold.
Genuine rubber mats have been sold.
Older style left front actuator has been sold.
Looking for the following for a 95 rrc.
Non-leaking rear view mirror
Fuse panel door/knee pad/whatever it's called
Walnut trim and ebrake boot
Non-leaking rear view mirror
Fuse panel door/knee pad/whatever it's called
Walnut trim and ebrake boot
I have a mirror that has clear glass. None of the typical Magna Donnelly drip. I don't believe the chromatic feature still works, though. Both map lights work fine.
For you, Dan, because you're such a sweet guy, $75
I have a perfect fuse box cover. It would also be $75.
The ski slope is not great. If you want it it would be $40
All prices include shipping.
http://www.ebay.com/itm/Range-Rover...ror-1993-1994-1995-w-Map-Lights-/201989428095
http://www.ebay.com/itm/1995-Range-...-Lid-Assembly-Fascia-BTR3725SUA-/192250720985
For you, Dan, because you're such a sweet guy, $75
I have a perfect fuse box cover. It would also be $75.
The ski slope is not great. If you want it it would be $40
All prices include shipping.
http://www.ebay.com/itm/Range-Rover...ror-1993-1994-1995-w-Map-Lights-/201989428095
http://www.ebay.com/itm/1995-Range-...-Lid-Assembly-Fascia-BTR3725SUA-/192250720985
Yes... #2. PM me a price with shipping to 04106 please. It's for an '88 if it matters but I don't think there were any changes.
I've got a couple of the inspection panels. They'd be $80 each.
http://www.ebay.com/itm/Range-Rover...-Inspection-Hatch-Panel-BTR3SUA-/201989302266
I have to get a picture of the passenger seat plinth finisher.
The only difference between the capping on your '88 and this one is the number of slots for lift tabs. Somewhere around '93 or so Rover dropped the two smaller lift tabs and only used the two larger ones. This capping is from a '95 so it only has the slots for the two larger lift tabs. Buy this and you can sell off the smaller lift tabs on eBay for about $40-$50/pr!
I take the fuse cover and the mirror. I'll pass on the walnut trim. What's your paypal?
Dan, if you want a nice leather e-brake boot add $20 and I can through it in with the other parts.