Link to pics
https://www.dropbox.com/l/9NqGSTYw7NiFQEbw4pLRTd
Parting 93 RRC LWB
Truck needs lots of work and it has been sitting for a while. No AC, no heat, abs pump is shot to hell Borg is dying and so forth. The motor runs great transmission works all windows, seats, interior lights and such work.
The truck starts and drives but it is not being used so its time to part it out. Yes I know DON'T PART IT OUT, DON'T DO IT!!! However I am not going to lose a ton of money and just let it walk. Everything is still on the truck and I will pull them as they sell. If someone wants to buy it as it sits send me a PM.
The body is beat up and faded. Interior Parts and Electronics you let me know what you want and I will give you a price. The truck is located in Central VA.
4.2 motor with 151k (will be full long block with all parts that are bolted to and ECU) well maintained motor. 1,500
Transmission 400
2" RTE lift HD springs with front stabilizer and Bilstein shocks $350
2" RTE body lift $150
RTE Rear Bumper with Nerf Bars $575
RTE Rock Sliders with square nerf bars (this is for LWB) $475
They have taken a beating and all of the powder coat is gone and have been rattle caned.
RTE Front Bumper with full brush bar and winch tray (had a warn 9.5 in it) $600
RTE rear only drag bar (front will work on the D2) $100
Rear lift gate is kinda crusty but better than a lot of other ones I have seen $300
https://photos-5.dropbox.com/t/0/AA...kJrfDRX28OyROJPQP_44u4CMlK4r_T28?size=640x480
Mantec Snorkel $350
There are more parts to be listed as it gets ripped down further. Will sell glass after interior is gone ect ect. The bumpers and sliders have been spoken for but not yet paid for.
https://www.dropbox.com/l/9NqGSTYw7NiFQEbw4pLRTd
Parting 93 RRC LWB
Truck needs lots of work and it has been sitting for a while. No AC, no heat, abs pump is shot to hell Borg is dying and so forth. The motor runs great transmission works all windows, seats, interior lights and such work.
The truck starts and drives but it is not being used so its time to part it out. Yes I know DON'T PART IT OUT, DON'T DO IT!!! However I am not going to lose a ton of money and just let it walk. Everything is still on the truck and I will pull them as they sell. If someone wants to buy it as it sits send me a PM.
The body is beat up and faded. Interior Parts and Electronics you let me know what you want and I will give you a price. The truck is located in Central VA.
4.2 motor with 151k (will be full long block with all parts that are bolted to and ECU) well maintained motor. 1,500
Transmission 400
2" RTE lift HD springs with front stabilizer and Bilstein shocks $350
2" RTE body lift $150
RTE Rear Bumper with Nerf Bars $575
RTE Rock Sliders with square nerf bars (this is for LWB) $475
They have taken a beating and all of the powder coat is gone and have been rattle caned.
RTE Front Bumper with full brush bar and winch tray (had a warn 9.5 in it) $600
RTE rear only drag bar (front will work on the D2) $100
Rear lift gate is kinda crusty but better than a lot of other ones I have seen $300
https://photos-5.dropbox.com/t/0/AA...kJrfDRX28OyROJPQP_44u4CMlK4r_T28?size=640x480
Mantec Snorkel $350
There are more parts to be listed as it gets ripped down further. Will sell glass after interior is gone ect ect. The bumpers and sliders have been spoken for but not yet paid for.
Last edited: