Radiator Fan Replacement - Aluminum

[Lutzgaterr]

My 97 disco?s plastic fan grenaded some years back and I got an aluminum replacement. I was in a time-pinch and realized that they sold me a fan that was not in reverse rotation:banghead:, needed of course with the 4.0 serpentine belt layout.
So I made it reverse by bending the blades? remember I was in a time-pinch. The fan has worked but I just replaced a water pump, that fan probably contributed to the bearing failure, so I would like to replace the current ?customized fan? with a correct fan.

Does anyone know which suppliers provide the reverse-drive aluminum fans that will fit the 97 Disco 4.0?

Supplier and the part number would be good.

Thanks in advance.
Bruce

 

[MUSKYMAN]

flexlite makes one...check out their site for the part #

 

[neil30076]

Hayden 2786, about $75 at Kragen, you need to open out the bolt holes slighly to fit it, but works fine.

 

[Lutzgaterr]

Is the diameter of the fan 19"?

 

[MUSKYMAN]

isnt that hayden # for the clutch?

I believe he needs tha actual fan not the clutch?

 

[Lutzgaterr]

Yea, I thought he was giving me a clutch part number.

So, is the diameter for the 4.0 a 19-inch fan?

Knowing that, I can go and get another flex-a-lite.

 

[neil30076]

isnt that hayden # for the clutch?

I believe he needs tha actual fan not the clutch?

oops, read the post twice next time!

 

[netjaws]

Is it true that the British say 'a-lu-mi-ni-um?'

 

[Lutzgaterr]

OK, got some vendors that provide aftermarket fans.
Now, who knows the diameter of the 97 Stock fan?
17, 18, 19 inches?

 

[neil30076]

Is it true that the British say 'a-lu-mi-ni-um?'

Yes we do.