Rear brake line fittings

[Tammaru]

Hey,

So the hard brake lines that go from the front of my 97 disco to the back rusted through and need replacing, no problem. I unscrewed the lines in the front with no issues. I got the fittings in the back where they connect to the flexible line/hose open also, but i was surprised to find a female adapter fitting in the back that both the hard line amd soft line both screwed into. Both sides seem to be 10mm x 1.0. Any idea where to get this?

T

 

[robertf]

I don't understand what you are asking.
Is the female adapter bolted to the diff? If so, that is just a union for the left and right brake lines. On ABS trucks the 2 sides are independent.

If you are asking where to get fittings, I bought mine at NAPA when I un-abs'd my truck.

 

[Tammaru]

i figured it out. I thought there was a double sided 10mm x 1.0 female adapter that conneced the hard line and the hoses in the back. It was a single sided female fitting that was attached to the hard line with a bubble flare. Bleeding the rears as I type. Thanks for the response!

T