RRC Dash Pictures please

cosmic88

cosmic88

Well-known member
Sep 15, 2010
436
0
Florida
I have done a pretty extensive search and found nada...


If you have a picture of the under dash area with all the relays, chime box, flasher relay and basically, the whole steering column area with the decorative knee panel removed I'd appreciate a look-see please.


I'm looking at you PT.
 
cosmic88

cosmic88

Well-known member
Sep 15, 2010
436
0
Florida
Kevin, thank you. This is for the '94. i thought you are a professional photog? :D

That is the area and a few more will help. All the 8 bells rum is gone...

I will post up a bunch of detailed Rrc dash removal pics with heater core out, fan assembly rebuild and damper box rebuild so the next person can find it all here

Pm sent to az
 
Last edited:
K

kk88rrc

Well-known member
Mar 26, 2007
1,187
3
Portland Maine
www.kevinkeithphoto.com
I do much better when I have a client paying. And that was just a quick pic for a comparison of what I found in the new 88.
https://www.dropbox.com/s/0ko5q6mw04g8k7v/Dash_wiring 2.JPG
That's what an aftermarket alarm mess looks like.

I'll put the iPhone down & bring out my professional point & shoot.

I finally tried the 8 Bells Rum…. taste more like a whisky than a rum. Still paired well with a campfire.
 
cosmic88

cosmic88

Well-known member
Sep 15, 2010
436
0
Florida
Not much compares to a home wiring job. Looks like a critter got in there, made a nest and rewired some shit around for you. Does it work?

Shall I pay for a shoot in the usual manner? Hooch... I think the layout and mounting for the relay bracket is different on the 94... We'll see.

That 8 Bells is awesome. Perfect sipping rum.
 
K

kk88rrc

Well-known member
Mar 26, 2007
1,187
3
Portland Maine
www.kevinkeithphoto.com
It did not work when I got her. Pulled it all out when I was chasing some electrical issues. It actually was clean wire install but it was just all shoved in there and looked like a mess.

I think the mounting is similar but the relay layout / quantity is different.

I'll do this shoot for Rover Karma. :victory:

What are you doing? Redoing the whole dash?
 
cosmic88

cosmic88

Well-known member
Sep 15, 2010
436
0
Florida
So the following images are from the removal of all dash components from my 1994 range rover classic LWB. I'll try to tag these pictures so the search engine will pick up on this thread.

Upper dash, lower plenum and fascia, air distribution box and heater core, fan and evaporator assembly all removed.











Here is a good example of some XTreme wiring...;)






Gotta love that stuff...





brake switch circuit was turned into a fuse and required this whole teardown in order to rewire.






here is the newly rewired brake switch plug




I rebuilt the air box with all new seals on the damper flaps, new hoses at heater core of course and reconditioned the fans while it was all out.

 
Last edited:
You must log in or register to reply here.
Top Bottom