Seat controls

[lowcountry]

The mechanism that controls the seat adjustment has been removed from the previous owner. The motor that actually moves the seat is good, but again, something has been removed. I am not sure, some sort of box. It isn't the actual control beside the seat, it was something under the seat.

The PO said I can "jump the two leads" under the seat to move the seat forward, back, etc.

Does anyone know how the hell this is done? I don't want to start connecting wires and short something out.

 

[Frank84]

look under your seat and you'll see the wiring harness that goes to the seat motors. Unplug the harness from the motor you want to "jump" and connect your battery (+ and -) with two small wires to the prongs in the connector. I forget if there is enough room for alligator clips, but you can just hold the wires there if needed. If you reverse the + and - the seat will move the other way.

 

[lugnut]

I have an extra seat switch harness that i made from a d1 seat harness to bypass the memory control unit the is missing in your truck. I will sell it to you if you want it? 30.00 plus shipping and i send you wire diag for the seat and instructions on how to do it. I have done thei on my 95 rrc but you loose the mirror switch function but who care i move them by hande. And you can use the factory switch that is already there. Text my and send you pic of the harness if youo want enjoy!

 

[lugnut]

Sorry phone number 803-609-5447 for seat harness