So I'm going to attempt to replace the head gaskets on my '95 myself...

[Paul K]

All:

Where can I find a step by step guide on how to get to and replace the head gaskets on my '95 D1? I can use my Defender as a reference because it has the same engine. This would be the biggest project I've ever undertaken, but the worst thing that can happen (other than a fire) is I can't finish it/the engine is toast, which is no problem because I can put the motor from my Defender in it when said Defender gets its GM engine.

I have confirmed that the head gasket is blown.

Thanks

Paul.

 

[PhD_Polymath]

Full factory service manual:

http://www.landroverresource.com/docs/D1_Workshop_Manual.pdf

It takes a second to load, but it tells you what needs to be done. Enjoy!

 

[Tugela]

Take a look at this thread:

https://discoweb.org/forums/showthread.php?t=67575

Note to self: I get enough requests for the Word doc I should just copy and paste it onto that thread.

 

[pinkytoe69]

http://paulp38a.com/range-rover-p38/engine-refresh/

For a P38 Bosch, so there are steps you don't need, but it's the best walk-through online IMHO.

 

[Paul K]

Thanks guys. Is there a list of all the papers I'll need anywhere? Because I live in BFE, I'll need to place an order with Rovers North.

 

[ERover82]

These:
http://www.roversnorth.com/ProductDesc.aspx?code=PLM083
http://www.roversnorth.com/ProductDesc.aspx?code=PLK0134

 

[Paul K]

These:
http://www.roversnorth.com/ProductDesc.aspx?code=PLM083
http://www.roversnorth.com/ProductDesc.aspx?code=PLK0134

Thanks!