Someone with "2 in OME kit and ATAs tell me ...

[Black_and_Blue]

Recently installed #2" OME kit on my O3 DII. Question to anyone who's installed the same kit AND BFG ATAs (on 16 inch wheels) -- what is the highest point (in inches) of the rig?

Ask because new parking garage (at work) limits entry to vehicles under 6'6. I'm running Yokohama Geolanders on it in the interim and can currently clear entry -- but I hate them and want to put on ATA's. Problem is I don't know what highest point will be, know there will be a difference. Any help is appreciated, tm

 

[BackInA88]

Flip down your visor there is a chart that gives you the heights stock.
What size At's are you putting on?

I have a 2" lift with 245 75 16's and just bearly clear my 7' garage door.


Steve

 

[Go4Lo]

i have a 3" OME lift on my D2 with 285/75/16 BFG ATs and i can still fit in my 7' garage with about 1.5~2" to spare.

 

[Lake_Bueller]

Not sure if this helps but.... I'm running 235/85 BFT ATs with 2" lift with and spacers on my DI. I have about 2" to spare on a 7' garage door. My total gain at the wheel well was about 3 1/2" with lift and tires. I believe the stock height on a DII was slightly lower (but I could be mistaken).

 

[Black_and_Blue]

Flip down your visor there is a chart that gives you the heights stock.
What size At's are you putting on?

I have a 2" lift with 245 75 16's and just bearly clear my 7' garage door.


Steve

Awesome, thanks guys (should have added I'm adding -- or planning to -- the 245-75-16s). And thanks for other info -- I'll go in there with a tape measure this weekend and check for low hanging pipes just to make sure there aren't any surprises.

 

[powerslide23]

I have 2" OME HD springs and 265/75/16 M/T's and will clear 6'6" garage barrier by an 1/4" if fuel tank is full. When empty it touches the barrier. SO I normally park outside when half full.