Spring combination -- Old Man Emu

[Apexdisco]

I currently have the following setup on 99 Disco I.

Front: HD OME 751
Rear: HD OME 762

I just purchased some 762's to place in the front. And I will purchase some 1" spacers for the rear. Will this setup work? For some reason, I thought it would, but can not find any documentation that says I can put rear springs in the front. I'm trying to obtain roughly another 1" on my suspension lift.

Thanks.

 

[Kyle]

I hope you have a good dental plan....

 

[marc olivares]

those 762's are really really stiff for the front's of the D1's
why not a 764? you get the same height....just less bounce, thus keeping all of your fillings in your mouth.


can you do it? yes
should you do it? i wouldn't

 

[Apexdisco]

Thanks for the heads up. I'll look into it.

 

[PHARAOHDISCO]

OME764 in the front
OME763 in the rear + 1" spacer

Or you might as well start with that same spring setup as mentioned above, but with 1" spacers in the front and 2" spacers in the rear. You will save yourself the trouble of dismantling your suspension in the future to add extra lift.

 

[-OTTO-]

If you got a Diesel-engine no Probs to put 762 to the front.
The weight of The Dieselengine is over 200kg.

greets

-OTTO-