Tech Page Help

[Rusty Shackelford]

hi all,
i was wondering how to post a procedure on the tech page. i was unable to find a prompt for a new thread or anything.
thanx in advance!

 

[I HATE PONIES]

What are you trying to post?

 

[Rusty Shackelford]

well, i wanted to post a water-proofing recipie from electronics to the entire vehicle. - i used some time and water tested teqniques that really work. i know most guys scoff at complicated procedures, deeming them unnecessary, but after searching around the site, it seems that there is a market for some solid advice.
thanx

 

[flyfisher11]

Send a PM to Axel (mod).

http://www.discoweb.org/forums/member.php?u=14

Cheers,

Mike

 

[Roverdoc]

just post a thread first....if it truly is a good tech report then the moderators can add it...you can not directly post into tech...the masses will be the judge if it is worthy.

 

[Rusty Shackelford]

thanks guys, i'll PM the moderator to look for the thread.
i'll post it on the disco tech forum first to see if it passes muster - it should be ready in a couple of days.
again, its just things that worked for me, there are many approaches to take and each vehicle's "needs" are as individual as the driver, so i hope all information will be taken with a grain of salt.