What size bolts

[maxyedor]

I'm putting together my spare-parts package for chasing the Baja 1000 and need some bolt sizes. Looking for the specs on the bolts that hold the rear upper shock mounts to the frame, and also the rear RTE upper shock mount bolts that go through the eye of the shock, I know they are 1/2"x13TPI but can't guess the length. Lasty I need the size of the nylocs at the frame-end of the radius arms and trailing links.

I could pull them off and take them to the hardware store to figure it out, but if I take them off then I have mo way o get to the hardware store.:banghead:

 

[mkronmal]

Land Rover Discovery 1 Fasteners
Michael Kronmal (mkronmal@yahoo.co m)

Qty Size Pitch Length/Type Location
2 M14 2.0 80mm Panhard Rod
2 M14 2.0 Locknut Panhard Rod
4 M16 2.0 100mm Front Radius Arm to Axle
4 M16 2.0 Locknut Front Radius Arm to Axle
2 M20 2.5 Nylock Front Radius Arm to Frame
2 M20 - Washer Front Radius Arm to Frame
2 M20 - Dished Washer Front Radius Arm to Frame
2 M20 2.5 Nylock Rear Link to Frame
2 M20 - Washer Rear Link to Frame
2 5/8 11 4in Rear Link to Axle
2 5/8 11 Nyloc Rear Link to Axle
6 M10 1.5 30mm Rear Link Bushing Plate
6 M10 1.5 Nylock Rear Link Bushing Plate
8 5/16 24 nuts Shock Towers
8 5/16 - lock washer Shock Towers
2 5/16 24 1in Rear Link Balljoint
2 5/16 - lock washer Rear Link Balljoint
4 M10 1.5 35mm Front Rollbar
4 M10 - Washer Front Rollbar
4 M10 1.5 Nyloc Front Rollbar
4 M10 1.5 35mm Rear Rollbar
4 M10 - Washer Rear Rollbar
4 M10 1.5 Nyloc Rear Rollbar
2 3/4 16 4in Top Link
2 3/4 16 Nyloc Top Link
4 M10 1.5 35mm Front Shock Mount
4 M10 - Washer Front Shock Mount
4 M10 1.5 Nyloc Front Shock Mount
6 M10 1.5 110mm Rear Upper Shock Mount
6 M10 - Washer Rear Upper Shock Mount
6 M10 1.5 Nyloc Rear Upper Shock Mount
8 M12 1.75 Front and Rear Sway Bar Mounts
8 M12 1.75 Nyloc Front and Rear Sway Bar Mounts

20 M10 1.5 40mm Axle Flanges


6 M8 30mm Water Pump

16 3/8 24 Nylock Propshaft (front and rear) ends
8 3/8 24 1.25in Propshaft (front and rear) diff end
4 3/8 24 1.25in Propshaft (front) transfer case end

20 M10 1.5 Nut Differentials

Engine
6 7/16 14 96mm Cylinder Head
14 7/16 14 66mm Cylinder Head

8 3/8 UNC 2.79in Rocker Shaft Pedestals
2 M4 0.7 14mm Stepper Motor (IAC)
2 M4 0.7 Potentiometer

3 1/4 UNC 1in Plenum Water Jacket
1 1/4 UNC 1-3/8in Plenum Water Jacket

1 M8 80mm Plenum Chamber
5 M8 55mm Plenum Chamber
6 M8 - washer Plenum Chamber

1 7/16 UNC 1-1/8in camshaft

2 5/16 UNC 3/4in camshaft retaining plate

5 5/16 UNC 3-1/8in Front Cover
1 5/16 UNC 3-7/8in Front Cover
3 5/16 UNC 4-3/4in Front Cover
9 5/16 - washer Front Cover

8 1/4 - lock washer Valve Cover Bolts
8 1/4 - washer Valve Cover Bolts
4 1/4 20 1-5/16in Valve Cover Bolts
4 1/4 20 7/8in Valve Cover Bolts


6 M8 1.25 40mm Exhaust flanges
6 M8 1.25 Prevailing Torque Locknut
M8 12mm Crankshaft Pully

16 3/8 16 1" or 2"? Exhaust Manifold to Heads


2 M4 15mm TPS



Use grade 10.9 for all metric
Use grade 8 for all SAE

 

[maxyedor]

Thanks, that's what I'm looking for.