New profile posts

1990 RRC - 3" OME Lift, Rebuilt 3.9, Wolfs, ARB rack, ARB Front Bumper, Winch
2002 D2 OME HD, Ashcroft T-Case, ARB Rear Locker, Under Armor-front to back, SafetyDevices Rack, ARB Front Bumper. No Engine.
2004 D2 HSE, Top-Hat D&D 4.6, Erson Cam (Wedgeshop), All Focal speakers, rear camera, stock everything else.
I'm Interested in the load bars off of the Disco 1 you recently bought, if you don't have plans for them.

Let me know...


Do you mean the removable bars that go between the fixed roof rack bars?
When deleting the cats can the pre cat O2 sensors be deleted or should they be retained for closed loop readings ?
Good afternoon Will,

Do you have a good black dash cover for a D2?
Mine is curled up like a dead flower.

Thank you
Hey, I wanted to check with you, I am having issues with my 04 DII. The problem is putting fuel into it. Currently I can only put about 12 gallons into it. A couple of months back I could put 16, so the problem whatever it might be is getting worse. Ideas??? Thanks, Keith
On your truck I've seen it but it's not very common. I think you either have a restriction in your evaps system. I'm thinking it has a dmtl pump that has a normally open vent that gets shut when the vehicle is checking for leaks. I've also seen a roll over valve in the filler neck cause it. Also if your charcoal canister is full of fuel it will cause it.

Just figure for fuel to go in, air has to come out.
you wouldnt entertain shipping at all? I would pay and get both
I would I just have to check shipping
Up and running! Replaced CPS (fixed the issue) and while I was at it, I replaced the SVS. Now about that alignment...
Time to eat some crow. My P38 sold to a DWeb user. I would like to make a donation to the site. And I will make a public proclamation attesting to the vast power of DWeb.
p m
p m
I bought a fair amount of stuff on Discoweb, sold a few parts, too.
I don't know if Chris has the setup for donations - will ask him!
p m
p m
Ping Chris - he has a way.
If still available, I'll take the:

Fender flares - set img_0586
Frame horns - pair img_0765
Frame brackets - pair img_0754 (LR529 OS & NS)

How much, shipped to Blaine, WA?

Hey Will, I am doing the HP24 trans an tcase on my 04 and noticed on the inside of the bell housing has scuffmarks in a circular pattern..... with the trans you have there, have you seen anything like that before? I have 2 in my garage both are HP24'S and both have the same scuff marks.
Let me look... I have 4 4.6 trans on the shelf and will take a peek today.