Author |
Message |
   
Rodney
| Posted on Monday, May 06, 2002 - 10:51 am: |
|
Has any one wired a flat 4 pin plug up to discvry...Help needed badly Thanks in advance, Rod p.s. did look up in archives and the only thing could find is for u-haul plug did not expln what wire whnt where.... |
   
Chuckster
| Posted on Monday, May 06, 2002 - 05:08 pm: |
|
Rodney, I've done it- couldn't have been easier... what's your question??? The Discos come pre-wired with a plug behind the passenger rear tail light, and a knock-out at in the body... I bought the trailering kit from AB, cost me about $110, but it comes with the harness, the receiver slug and the ball. Simple plug-and-play... Chuckster |
   
Rick Lindgren
| Posted on Monday, May 06, 2002 - 06:21 pm: |
|
Rodney, If you can really get your hands on a genuine LR trailer wiring kit, receiver slug and ball for $110 that is pretty cheap. When I was looking around the price for the LR trailer wiring adapter was $150 - $250. I opted for the less expensive solution of a 4-pin adapter from NAPA. See my response at the bottom of this post: ../17/1397.html"mailto:[email protected]">[email protected] Rick |
   
Rodney
| Posted on Tuesday, May 07, 2002 - 02:12 am: |
|
That hit the nail on the head...I am using a standerd plug and could not get the break lights and turn lights working correctly because when i put the break light wire with the turn light it would fead back to the truck and make all parking light come on when break was pressed.....so it looks like i need the tail light converter...I had all the wires marked using a trusty wiring diagram, but the trailer only had 4 wirs(tail,turn rt trun lft, ground) and the Dscvr has 5 (tail, trun rt, trun lft, break, gound).......so off to NAPA I go... Thanks, Rod P.S. dosnt saving 120 bucks feel good.... |
   
Kingfish (Kingfish)
| Posted on Tuesday, May 07, 2002 - 07:34 am: |
|
In case a trailer short causes a fuse to blow, is there a particular trailer fuse, or would a short blow out a variety of fuses? Anyone had this happen? |
   
Rick Lindgren
| Posted on Tuesday, May 07, 2002 - 12:06 pm: |
|
I'm glad that it helped, Rodney. I'm still learning all of this stuff and have gotten a lot of good information from this BB. It's nice to be able to help someone else. Rick |
|