| Author |
Message |
    
Po Chen (Discopo)
| | Posted on Wednesday, June 19, 2002 - 04:50 am: | 
|
Anyone know how to re-program the remote/key fob for a Disco I (1996)? Dealer wants to charge $100 for a new remote and at least 1/2 hour to program remote for an additional $45. Sounds a bit too pricey to me, but I've never had to deal with it before. I can't seem to find any reference on how to do this. Thanks. |
Garrett #2
| | Posted on Wednesday, June 19, 2002 - 08:43 am: |
|
I'm not sure if it is the same for a '96 as it is for the 94-95 but here are the instructions for the 94-95. More than likely it isn't the same but maybe it is a slight variation for the 96???
http://www.discoweb.org/faq/remote.htm
Sorry, it's all I could find.
Good luck! |
Po Chen (Discopo)
| | Posted on Wednesday, June 19, 2002 - 10:56 am: |
|
Thanks. To be more specific, this is for the remote with 2 buttons (one unlocks, other locks). Not sure if this is for the single button, but I'll give it a shot. Thanks. |
Rob Davison (Pokerob)
| | Posted on Wednesday, June 19, 2002 - 12:03 pm: |
|
it wont work for a 1996 style...the correct proceedure is in the BBS archives somewhere.
rd |
Po Chen (Discopo)
| | Posted on Wednesday, June 19, 2002 - 03:00 pm: |
|
Sorry for the ignorance. What is the BBS archives and where can I access?
Thanks,
po |
Garrett #2
| | Posted on Wednesday, June 19, 2002 - 03:56 pm: |
|
Here you go!! Sorry for the wrong directions above. Check this link and it should help you figure it out!!
../17/2611.html"#333333"> |
Rob Davison (Pokerob)
| | Posted on Wednesday, June 19, 2002 - 05:34 pm: |
|
http://www.discoweb.org/cgi-bin/discus/board-search.cgi
that link above and discussion is the same as the other link in the FAQ. for the one button style i thought, now i am confused though.
try it out and let us know
rob |
Anonymous
| | Posted on Wednesday, June 19, 2002 - 06:07 pm: |
|
If you have removed the battery the key-fob/handset needs syncronising with your car.
If handset has two buttons ...
1. Remove the handset battery and check its the correct type/code for your vehicle [wrong battery = won't work properly!]
2. With handset battery removed, press and hold each handset button for minimum of 10 seconds to discharge the electronics.
3. Clean and refit the battery.
4.In range of your car point the handset at your car and press 'lock' successively, but not too quickly, until your car locks [It should lock on 4th or 5th press]. Handset now syncronised with your car.
5. Press 'open' and doors will unlock. |
|
Closed: New threads not accepted on this page