Recent content by kjg48359

Yes it is available bnmack1. Still in it's original packaging, never installed.

RRC :: 1990 Land Rover Range Rover (2018-01-07 21:58:33)

Speed/Traction Sensor #STC2786. This is an extra sensor I ordered with rebuilding axle bearings (there are 2 per axle, one per side) ordered for a 2000 p38. Should fit all models of p38 and (I believe) Disco 2. Includes the clip, in original package...

[/URL][/IMG] My favorite vehicle for a couple of years, and then I dropped a bearing on one of the piston crank arms and I sold it to a guy in OH who was able to fix the engine for cheap having a couple of spare p38's around. However, I recently "butt dialed" him and eventually we...

Thanks Rover Mac. Unfortunately, a cylinder liner has now slipped. See vehicles for sale.

Sorry squirt - you're right. It appears that a cylinder liner has slipped.

Sad, but I've spent over $18,000 on this vehicle with the intention of running past 200K on it. After seeing a crack in overflow container for the line for the intake manifold I replaced the both overflow bottle and line. A couple of days after however, a cylinder has slipped on the right bank...

We all know the drill, right? Can't seem to want to get rid of the beloved beasts just because of something silly (which is why must of us become our own mechanics when we can). So over the last couple of years, I purchased a 2000 p38 that according the specialty Bosch service center was one...

Thanks Discostew. What a PIA. So according to the service manual, I took off the knee panel and a small black plastic panel that is down by the feet. The foam that looks like it's supposed to help seal the duct that runs between the left blower housing and the central core unit I think is...

thanks jhmover: I actually checked that last week (now I'm suspicious there might actually be a cracked hose even). I'm thinking maybe I'll take the panel off and drive it while feeling around under the panel to see if I can help pinpoint a more general location...

Hi, There seems to be cold air coming out of the dash in that small gap under the steering wheel at the top of the knee board/panel (right where you can raise/lower the steering column). I think the blend doors are working ok, at least the major ones seem ok (air is getting to the feet and...

Thanks for the suggestions guys. I did call around to see if I could replace the original harness, but it sounds like I would have to either get a used harness, or contact specialty business probably in GB. But it's not readily available. I'm thinking the easiest way is to just replace the...

A previous owner on my 2000 P38 had put in HID lights. Generally I've been happy with the extra light, but lately I've gotten a few flashes. So I tried to re-align the lights, but I think the real problem is that the solenoid that operates the positioning of the bulb is failing. This means...

Enjoy the following (taken from an Autozone FaceBook question). Professional Comedians can't do better: You take the exact same route to work everyday. However, approaching the usual stop light, it takes your car longer to come to a complete stop with a feeling that your car is "nose diving."...

Thanks jymmiejamz. Originally, the first time I changed the fluid, there had to be 2 to 3 times as much.