Recent content by Zak Pandino

Spare Transfer case LT 230 gear box off a 96 D1 for sale. Located in Cookeille Tn 38501. Priced at 200 obo. Call Zak at 931-267 three seven 68. Cheers

This has been very irritating, my idle would seem to be different every day, (either high or too low, and not idle without help). I would have to get out and adjust the idle if I wanted to leave the driveway. . I unplugged the Idle Air Control Valve and the erratic idle has seemed to finally...

DAM TPS! I unscrewed and adjusted the TPS and I could put the idle where i wanted it! Careful not to disrupt its position as I put the bolts back in, as mine seemed very finicky. It idled nice and quiet how it should, so I took it for a ride and the haunting high idle CAME BACK! Every time I...

Timmy, Did you inspect your idle air valve? I took mine out and tried to adjust the screwable 'male' part to maybe reposition where its is in there - changing the amount of air its allowing through. But when I tried this, it only made it worse (2700-3000 RPM). Seemed like it was going back to...

Thanks alot Kev, Are you saying to swap the switches in the center console with each other? Because that was the first thing I tried to no avail, but I dont see how this would tell me if the window motor/regulator was bad, b/c no matter witch switch you plug into any of the wires they are...

I'm thinking it might have something to do with the sensor right below the TPS (MAS I thought). Possibly a vacuum leak, I took the sensor off and checked it out. I was not sure what I was looking at but, possibly its gone bad? After taking it off and repositiong the tip it changed the idle...

Sorry let me clarify, You interpreted my mess of troubles quite well, after that soder job I had ALL windows working (prior to only the FR passenger). Then none after moving it. It may have been possible between the two soder jobs that I didnt have the plugs all the way in, but that doesnt...

Thanks for the new clutch PT - Adaptive values reset?? What in the world is this?

Adaptive values reset? . . And no it is not a result from any new components that I am aware of, if I recall it Just happened one day, around a year ago. YES IT IS VERY ANNOYING! I have the 5 spd. Thanks Timmy, Ill try unplugging that next time, probably look odd taking off a tire in the...

Autozone said they couldn't read it > go figure, so Im at a loss for getting the codes unless I want to drive 100+ miles to the stealership. I will look into finding some place or way to retrieve the codes, but meanwhile is there anything else I can check that may cause the engine to idle so high?

I had this high idle problem a long time ago and a friend of mine told me to simply unplug the MAS mass air flow sensor, I did and it dropped the high idle (2500 RPM) down to 8-900 RPM and has been great for almost a year now. Me and my brother were tinkering and he noticed it was unplugged and...

**RIDDLE ME THIS** . .(very helpful guys) I have only had front windows working on my 96 D1, but when my driver window went out I had to do something (it would click in the ECU area). I did the solder job explained on fixing the rear windows AND IT FIXED ALL the windows! Turned the truck on and...

But IT WORKED, the rear windows worked after the re solder, then I just moved the vehicle and there is nothing, not even a sound of a failing relay switch or motor etc. So It made me think something came undone or blew when i started the vehicle and moved it less than 15 ft. But you say window...

**RIDDLE ME THIS** I had the same problem go figure, re-soldered the faulty solder reinstalled AND IT WORKED! Moved my truck to the other side of the yard now NO WINDOWS WORK, there is no reaction to any of the windows or switches front or rear - - Not even a clicking sound when one wasn't...