Search results

Well maintained '04, desirable last-year with lockable transfer case. Likely about due for a new battery, and needs some minor exhaust work. Very minor rust on the lower driver door, and upper corner of driver's windshield pillar. Owned a '94 DI prior to this one (old photo attached), so...

Before I bother to find a paint shop to match the paint color, thought I'd see if anyone had a matching fender for the '04 Westminster...apparently it's the lighter of the grey as you can see: http://img.photobucket.com/albums/v686/craneage2001/wrong_color.jpg

So...they must have had the intake off at some point, and for some odd reason, they never put these brackets back on. Both sides (passenger and driver) are loose, leaving what appears to be a port to the intake open (?). Anyone know what size thread these bolts might be?

Looking for a headlamp finisher/trim for the 03/04 headlamp on the passenger side; preferably grey, but may consider other colors.

Testing the waters -- I don't want to see it go, but a change in life situation seems to say otherwise. Well maintained 1994 DI, in good daily driver condition, with full service records over the last four years I've owned it down to every last tank of fuel. Off the top of my head: New tie...

Anyone have the storage bin for the passenger side of a DII? Preferably black, but other colors could work if need be..

Sometime in its past, this DII (2004) either had it's ignition lock replace or the drivers door replaced --- either way, the ignition key doesn't open the door, and I don't have the door key. The remote fob does work...but having an actual key to unlock the door in case of issue is required...

Has anyone tried an ARB from a RRC on a DI? From what I know, I believe the frame mounting should be close or matching, but not sure on how it would line up to the body/grille. Any info would be appreciated...

My steering has suddenly become 'notchy' for lack of a better term --- the wheel will not naturally return to center after a corner. At times will feel like strong pull (like a hung brake), but it's not. It also is variable, depending on if you turned recently, etc, and you can clear it up by...

Anyone have a cheap set of four of the stock spare steelies? I'm in the WI area (54401)... Someone's got to have a pile of em from their parts rigs. :-)