'96 D1 OME lift, ARB bull bar, SD rack - $3,500

N

NiteTrain

Well-known member
Jul 23, 2008
63
0
Georgia
1996 D1 SE7, 110K miles, 2" OME lift with HD springs, ARB front bull bar, custom rear heavy duty bumper, SD rack, rear ladder, NATO wolf wheels with 265/75/R16s

The good
--------------
runs great
transmission replaced 40K miles ago
power windows and power seats work
limb risers
rear driveshaft converted to U-joint
new rear shocks
new front steering stabilizer
new spark plugs
new water pump
new radiators hoses
coolant system flushed
new front brakes
all wheel/axle seals/wheel bearings were checked and replaced if needed replacing
fresh oil change
fresh oil in both diffs
fresh oil in transfer case
fresh oil in swivel ball housings
brake fluid flushed
sunroofs do not leak
new wheel bearings
extra parts (new wheel bearings, U-joints, seals, gaskets included)
all parts/fluids listed except transmission were replaced within past 200 miles

The bad
------------
has some body damage from off-road use (see pics)
has scratches
cut in front drivers seat (see pic)
needs drivers side mirror (should have this replaced soon)
paint faded on hood

Bottom line it's a solid rover with some dents and scratches..great off-road

$3,500 for everything
email greg1993 AT gmail DOT com
located north of Atlanta, GA

without rack -$500
without ARB -$500
without ladder -$100

not looking to sell mods unless rover sells first without them

pics here
http://s92.photobucket.com/albums/l6/NiteTrain1/D1/
 

Attachments

  • roverkayak1.jpg
    roverkayak1.jpg
    201.1 KB · Views: 323
Last edited:
WILL.TILLERY

WILL.TILLERY

2
Apr 20, 2004
6,928
226
Floyd, Virginia
NiteTrain,

Forget the Garrett comment.. It's like your girl telling you about some guy she had a great one night stand with and then showing you his picture. horrifying. You look at yourself in the mirror and ask "why?" and question the very reason for the relationship in the first place.

Just realize she was "preowned" when you got her and you had nothing to do with who was pushing all her right buttons before you.
 
Last edited:
garrett

garrett

Well-known member
Jun 18, 2004
10,931
5
53
Middleburg, VA
www.blackdogmobility.com
I am as much of a badass as Wade, but without the gimpy leg in Road House.

Good to see her still getting some use. It was a very solid truck - smooth motor and very little rust.

I bought it with like 30K on it back in 2000 in LI, NY. Replaced the motor and trans (both used) when I was living in PA around 2003/2004.
 
N

NiteTrain

Well-known member
Jul 23, 2008
63
0
Georgia
garrett, were you the one that did the U-joint conversion on the rear drive shaft/flange? If so you used the wrong spacer ring for the pinion ;-)
 
N

NiteTrain

Well-known member
Jul 23, 2008
63
0
Georgia
yeah, it wasn't a major issue..the flange just didn't mesh with the pinion all the way..but it was close. I ordered the correct spacer from AB for $10.
 
V

Viggen

Well-known member
Jul 1, 2009
274
0
va
garrett said:
I am as much of a badass as Wade, but without the gimpy leg in Road House.

Good to see her still getting some use. It was a very solid truck - smooth motor and very little rust.

I bought it with like 30K on it back in 2000 in LI, NY. Replaced the motor and trans (both used) when I was living in PA around 2003/2004.
Click to expand...

When did you sell it? I saw you driving around in a green D1 outside of Gainesville a couple of months ago. Is this a different one?

OP, how much tread is on the Swampers? Are they 33x12.50 or skinnier?
 
garrett

garrett

Well-known member
Jun 18, 2004
10,931
5
53
Middleburg, VA
www.blackdogmobility.com
That was likely JB driving one of my old DIs that is now owned by the company we work for - Overland Experts.

I've been driving a '07 Tacoma for a while now. Nice being able to train on a truck 8 hours a day and drive it over a 100 miles a day without issue. :)

I sold the '96 DI about 3 years ago I guess. I don't really remember.
 
N

NiteTrain

Well-known member
Jul 23, 2008
63
0
Georgia
I was offering to sell the super swampers separate to sweeten the deal for the D1. If it sells without them I'll keep them for another project and sell the defender alloy wheels. Sorry for the confusion.
 
You must log in or register to reply here.
Top Bottom