So after putting my engine back together, it seems to be leaking coolant from a pinhole in at the rear of the bellhousing where it bolts to the transmission.
I supposed it may not be a pinhole and coming from somewhere else. But I stuck my finger over the apparent pinhole and the fluid acted like it was under pressure and sprayed out from under my finger...
During the install, I had to really jack the engine up against the firewall to get enough clearance for motor mounts. I would up breaking one of the fuel lines.
I wonder if I might have broken something related to the coolant system at the same time...
Engine seems to run fine and there does not appear to be any coolant in the oil.
I supposed it may not be a pinhole and coming from somewhere else. But I stuck my finger over the apparent pinhole and the fluid acted like it was under pressure and sprayed out from under my finger...
During the install, I had to really jack the engine up against the firewall to get enough clearance for motor mounts. I would up breaking one of the fuel lines.
I wonder if I might have broken something related to the coolant system at the same time...
Engine seems to run fine and there does not appear to be any coolant in the oil.