Been chasing a squeak for what seems like forever now. Upgraded to the 90 setup w/vented discs. Issue is the brake are chirping like they are are making a tiny bit of contact with the rotor, noise goes away immediately when pressing the brakes. Wheel bearings are fine.
I have the correct length pins, but are the spring lengths different for the D1 and D90? Rovers north lists the same hardware kit for the D90 and D1, which is what I have. The D90 page lists these pads clips which I do not have, I thought those were a rear-only thing. The pads are definitely riding up and over the rotor (I already had them out and chamfered them a bit) but the noise came back immediately. So it seems maybe those clips are what I need?
I have the correct length pins, but are the spring lengths different for the D1 and D90? Rovers north lists the same hardware kit for the D90 and D1, which is what I have. The D90 page lists these pads clips which I do not have, I thought those were a rear-only thing. The pads are definitely riding up and over the rotor (I already had them out and chamfered them a bit) but the noise came back immediately. So it seems maybe those clips are what I need?