this bro is just plain lucky.
http://shock.military.com/Shock/videos.do?displayContent=192557&page=2&ESRC=dod.nl
http://shock.military.com/Shock/videos.do?displayContent=192557&page=2&ESRC=dod.nl
ptschram said:Snow in the bore?
I've seen many instances of this happening with shotguns, but never a rifle. Had a friend of mine's Browning trap gun barrel not blown up, but bulged from a kid putting a gum wrapper in the end of the barrel.
Skaramunga said:that's what i thought too, wrong ammo. i couldn't figure it out tho? maybe it was a new gun & he was a dipshit.
that kid needs a serious talking to.
ptschram said:Overloaded cartridges typically result in blowing the barrel from the action, blowing the bolt out the back of the action with the locking lugs stripped off, or the front ring tearing. What we see here is more consistent with an obstruction in the bore.
I have seen many firearms failures from when my dad and I ran our gun shop. Wrong ammunition, or overloaded cartridges almost always results in action damage, or at the least, distortion. Bananna-peeling of barrels is almost always due to bore obstructions.
tightgroup said:Or a squid load
ptschram said:Thus, an obstruction in the bore.
The squib load left a bullet somewhere in the bore and the next one banana-peeled the barrel. I've seen it happen often with trap guns where the wad remains in the barrel.
This tends to be a problem at bigger ranges where there are many shooting at the same time and the guy with the squib load might not be able to hear the difference in the report and then goes on to the next target, or the next station and the next time he's up to shoot, BANG! The barrel banana-peels.
I've had one instance of a cartridge separate. I was so glad I was shooting a Remington manufactured 03-A4 Springfield with the big gas ports in the front ring. I still looked like a raccoon! That shell didn't get reloaded again:smilelol:
kennith said:That is possible as well. Squib loads can certainly do that. Very dangerous.
Cheers,
Kennith