On a D2 is there any other option for the manifold to y-pipe studs? Could I put bolts in instead? Those studs are a PIA and a bolt seems so much easier. If this is the stupidest idea ever please let me know!
so....drill out existing holes and use a bolt and nut? or could I use the existing threads and just tighten the bolt in it?
so....drill out existing holes and use a bolt and nut? or could I use the existing threads and just tighten the bolt in it?
Unless your studs shear off like mine. Then drill them out and run a bolt/nut.No unscrew the studs and screw in bolts. I used cap head Allen screws to fit. M8x1.25 iirc.
Home Depot sucks balls. Lowes might have it. Smaller places like Ace sometimes have better stock, too. Otherwise there's always McMaster.got it thanks....
You think a Home Depot/Lowes place would have what I need? Maybe in the "specialty" hardware section.
Unless your studs shear off like mine. Then drill them out and run a bolt/nut.
How hard it is to remove broken studs?