The truck sat for two years. Put a new battery in it it fired right up. Drove it home (4 miles away) and it died halfway there. Battery was dead we let the truck run for a good hour or so after it was started for the first time. Replaced the alternator everything was fine. Hooked up a winch spooled it all the way in. Bled some coolant let the truck run for awhile again. Now it won't start. I have plenty of fuel pressure but no spark at the plug wires.
Where should I start with this? I looked at the inertia switch but I can't make heads or tails with a flashlight. :banghead:
Any ideas or input would be great.
Where should I start with this? I looked at the inertia switch but I can't make heads or tails with a flashlight. :banghead:
Any ideas or input would be great.
