Parting out 95 Range Rover Swb with Arb swill

[Drillbit]

Now parting 95 Range Rover SWB with lots of off road goodies. Arb front winch bumper w. two Hella's $800 shipped, Arb rear bumper 500 shipped, Thule Roof bars, basket, and 6 lights $325, 4 265/75/16 Daytona Timberlander MT's 90% tread with a similar sized spare that is fairly worn $450 shipped. I think the lift is a 3" RTE with Bilstien shocks, once I get them off I will have prices. Car is missing trans, t case and exhuast. Engine is supposedly rebuilt, will have more info on that later. Front seats are rough but it has a lot of the rare 95 goodies. Post up what you need or call me for faster service

pics here

 

[p m]

Marty, how's the rear seat on this one?

 

[Drillbit]

Nice, it's parchment. What color do you need?

 

[p m]

Beige.

 

[SteveA]

Do you know if the seat ECM works?

 

[Drillbit]

Seat ecu works 220 shipped

 

[Flyfish]

Is the interior tan ?
Prices on:
Plastic door pull inserts;
Climate control gauge cluster;
Plastic surround in front of the gauge cluster.

Thanks!

 

[Drillbit]

Plastic door pull inserts; 10
Climate control gauge cluster 65
Plastic surround in front of the gauge cluster 140 the screw holes aren't perfect but would be fine with bigger headed screws no cracks

 

[Grenade]

The front bumper doesn't fit on a D1 does it?

 

[Buddy]

The front bumper doesn't fit on a D1 does it?

It will bolt up to the DI. Fit and finish is up to interpretation.

 

[bryno]

Marty, Looking for LR3 EAS compressor new or used.

 

[Grenade]

It will bolt up to the DI. Fit and finish is up to interpretation.

The lower part of the grill has to be trimmed correct?

 

[Buddy]

The lower part of the grill has to be trimmed correct?

I don't know, I know that is what's needed to fit a DI bumper on a DII. The RRC and DI have the same chassies so the bumper will bolt on and I've run a DI RTE bumper on a RRC. The biggest difference is that the RRC is more flat in the front while the DI has a slight curve.

 

[Drillbit]

Front and rear bumpers sold. You don't have to trim the grille for just the bumper but you do to mount the winch.

 

[Grenade]

Thanks for the info guys.

 

[Shiftonthefly1]

I could use the drivers front fender. Also has the lift sold? If not I'd be interested in that as well.

 

[Drillbit]

I have the lift still, also the fender Give me a call

 

[mpruiks]

high pressure pump for the ABS still around?