On my 98 D1, What is the best way to change the front pinion angle? I have a 2 inch lift which I know everyone is going to say the pinion angle shouldn't be affected but I measured it last night.. I put an electronic angle finder on the front drive shaft and zero'd it. I then placed in on the flat spot on the bottom of the front diff and it read 8.9 degrees.. The diff looks like it's pointing up. Rear diff was also measured, with the angle finder zero'd on the rear drive shaft, the rear diff is pointing down about 4 degrees. Am I measuring this correctly? Or is the angle measurement supposed to be the difference between the center diff and front or rear diff? Thanks.