When I was adjusting the swivel pin preload the passenger side swivel suddenly started gushing oil. I believe it started after I disconnected the steering rods and allowed the assembly to rotate itself backwards to its rest position. Took my tension Adjustments and started disassembly and then noticed the fluid was flowing fairly rapidly out the bottom of the swivel housing.
Can allowing this swivel housing to rotate beyond a certain point damage the seal?
Will I be safe running it with a shot of quick shot Greece? I've always run 90/140 wt oil in the past and never had an issue but the rate at which it was leaking I found a alarming. It drained the entire swivel in less than five minutes .
Can allowing this swivel housing to rotate beyond a certain point damage the seal?
Will I be safe running it with a shot of quick shot Greece? I've always run 90/140 wt oil in the past and never had an issue but the rate at which it was leaking I found a alarming. It drained the entire swivel in less than five minutes .