Ok ! I removed the console and the shifter complete from the floor to remove the Insulation. Cleaned and put everything back to gether without never shifting it out of park. after I finished. I started the engine. moved the shifter through the gears. shifted back to park and the it would not go the Cable was at the end of travel so . I thought it most have moved where fastened to the trans.. So I had to leave it in Neutral and the key in the ign.. What could have happened.?? It works in all the other gears just fine... took the shiftier cover back off to move the solenoid to get it out of park.shifter only not on the Trans...