Does anyone know what size wrench I need to remove the oil cooler lines from an r380 tranny?
t42beal13t Well-known member Feb 21, 2012 117 4 North Carolina Sep 26, 2013 #1 Does anyone know what size wrench I need to remove the oil cooler lines from an r380 tranny? Last edited: Sep 26, 2013
ERover82 Well-known member Nov 26, 2011 3,923 460 Darien Gap Sep 26, 2013 #2 Don't you have a caliper? If not, use an adjustable wrench and tape measure.
t42beal13t Well-known member Feb 21, 2012 117 4 North Carolina Sep 26, 2013 #3 I have a caliper but I'm at work and want to pick up the correct wrench before I get home.
t42beal13t Well-known member Feb 21, 2012 117 4 North Carolina Sep 26, 2013 #4 22mm for those interested.
ptschram Well-known member Sep 27, 2004 21,955 50 In the shop doing the Lord's work one broken Rover www.ptschram.com Sep 28, 2013 #5 Sure about that? Should be 24 mm or 15/16" for the bigger fittings.
t42beal13t Well-known member Feb 21, 2012 117 4 North Carolina Sep 28, 2013 #6 22mm wrench removed them. I disconnected the lines from the back of the transmission if it makes a difference.
22mm wrench removed them. I disconnected the lines from the back of the transmission if it makes a difference.
ptschram Well-known member Sep 27, 2004 21,955 50 In the shop doing the Lord's work one broken Rover www.ptschram.com Sep 28, 2013 #7 It does. It would also help if I read better The radiator fittings on many Rovers are 24 mm-15/16" those on the transmissions of many are 22 mm or 7/8". Carry on.
It does. It would also help if I read better The radiator fittings on many Rovers are 24 mm-15/16" those on the transmissions of many are 22 mm or 7/8". Carry on.