x2kennith said:
I used a garmin GPS windshield mount and use it as a temp gauge and a corrected speedometer everyday.
New Discovery II Enthusiast In Houston
- Thread starter dgosh28
- Start date
I used a garmin GPS windshield mount and use it as a temp gauge and a corrected speedometer everyday.
kennith said:
Thanks Kennith. I'm looking forward to talking with him and finding out about the product.
Hijack alert : anyone use the Android app called Torque, to read codes and clear them? Also has a speedometers and other instrument functions.
Jake, Ive been looking at this.. http://www.amazon.com/PLX-Devices-K..._2?s=automotive&ie=UTF8&qid=1361457628&sr=1-2
It works in part with the Torque App. I meet a guy who is using the Iphone version of this on his P38 and he loves it.
It works in part with the Torque App. I meet a guy who is using the Iphone version of this on his P38 and he loves it.
Anyone tell this guy why he's at it to check his rotoflex for cracks as not to mistake a problem with a new or re balanced drive shaft? Maybe just go ahead and replace it all at the same time.
I use it every day to monitor the engine vitals. It works great and no issues to report. You can set it up to give audible warnings for any pending OBD errors as well. One display in the software can be set to give real time info about engine temps, speed, etcJake said:
This is the bluetooth OBD2 reader I run it with.
http://dx.com/p/obdii-bluetooth-car-diagnostic-cable-black-blue-orange-dc-12v-42825
ArmyRover said:
Just got off the phone with Justin. Really great guy. I ordered the driveshaft over the phone and should have it by the end of next week. Thanks for giving me his information.
Jake said:
I may not follow all the rules here, but as far as I am concerned it isn't a hijack if it is after post 10. I come on here to gain knowledge and to have a good time so feel free to offer any info you like on my threads. It makes the thread far more interesting.
kennith said:
I'm not familiar with these units. Are they similar to the Ultragauge? I ordered one of those and it arrived last week, but I haven't used it yet.
dgosh28 said:
It is similar to an Ultragauge in the same way that the Star Wars defense program was similar to the fly-annoying balls dangling from the bottom of a sombrero.
Cheers,
Kennith
kennith said:It is similar to an Ultragauge in the same way that the Star Wars defense program was similar to the fly-annoying balls dangling from the bottom of a sombrero.
Cheers,
Kennith
OHHHHH!!!! That similar.
dgosh28 said:
No worries, that's what this place is for. If memory serves it's made in Merry old England. I could be wrong though
atriot: Tell your Daughter thanks for serving
ArmyRover said:No worries, that's what this place is for. If memory serves it's made in Merry old England. I could be wrong though
Tell your Daughter thanks for serving
Thank you. I am very proud of her. She made E5 in 34 months. I just wish we got a chance to see her more, but hopefully this summer.
Cracked/ broken front and rear bumpers seems to be common with these trucks. Where do most of Y'all go to get replacements? It seems odd that the factory would install cheap plastic bumpers instead of rubber on such an expensive vehicle. does anyone have a lead on a good used or inexpensive new front bumper?
dgosh28 said:
They are easy to find around here. There are a number of part suppliers here, and there's always a Rover on the chopping block. Check the "Parts For Sale" section for a few new arrivals being disassembled.
There's nothing really wrong with the bumpers, though. They're designed to be wimpy. They are light plastic over light steel, attached to aluminum crush cans. They have to break fairly easily. These frames aren't forgiving.
The bumpers don't just go about breaking all by themselves, though. You've got to beat on them, or involve yourself in a collision. They aren't of the variety to flex and pop back out. They just crush and crack when hit hard enough.
Land Rover figures anyone that needs a better bumper will just go out and buy one, and they are right. Better stuff has been available at dealers for those inclined to make the purchase out of the showroom or on special order.
Cheers,
Kennith
kennith said:
Thanks Kennith,
I have seen a few bumpers on eBay, but $500+ for a plastic shell seems extreme when a chrome bumper for a Suburban can be had for that kind of money. I guess I better shop around more. What kind of bumper do you prefer? Your advice so far has been great so if you have a recommendation I would welcome it.
I'd call Drillbit or Will Tillery as a start.
The bumper you choose depends on how you plan to use the vehicle. If you don't want a winch, and don't plan to do any difficult off-pavement driving, it's probably best to just grab another factory one from one of the sources I mentioned.
If you want to install something better, you've got to decide what you want out of a bumper, and which features are most important; such as durability, approach angle, versatility, appearance, winch plate, recovery points, light mounts, and things of that nature. You've also got to decide whether you want something out of a factory or more custom. Prices are all over the place.
Right now, though, it just sounds like you want another factory bumper that's pretty.
As for comparing prices to the Suburban bumpers, it's not a fair comparison. There are a lot more used Suburban bumpers out there, so they are cheaper. Buying from one of the people here will be cheaper than Ebay, anyway.
Cheers,
Kennith
The bumper you choose depends on how you plan to use the vehicle. If you don't want a winch, and don't plan to do any difficult off-pavement driving, it's probably best to just grab another factory one from one of the sources I mentioned.
If you want to install something better, you've got to decide what you want out of a bumper, and which features are most important; such as durability, approach angle, versatility, appearance, winch plate, recovery points, light mounts, and things of that nature. You've also got to decide whether you want something out of a factory or more custom. Prices are all over the place.
Right now, though, it just sounds like you want another factory bumper that's pretty.
As for comparing prices to the Suburban bumpers, it's not a fair comparison. There are a lot more used Suburban bumpers out there, so they are cheaper. Buying from one of the people here will be cheaper than Ebay, anyway.
Cheers,
Kennith
Last edited:
kennith said:
Good Morning,
You make some very good points. I do just want a stock bumper since i doubt i will ever want to take the truck into any serious off road conditions. I tend to be the kind of guy that likes to bring my vehicles back to as close to stock as possible. The furthest this thing will ever get to "off roading" is probably pulling into a campsite in Colorado or Tennessee so that I can pitch a tent. Maybe a little mild beach driving, if I can find a beach that will allow such a thing.
Once again, I appreciate your help.
Dan
I would search for local LR clubs or repair shops.. They may have leads on local guys parting out trucks..
Shipping on a bumper will cost you more $$.
Shipping on a bumper will cost you more $$.