Turn signals & hazard lights stopped working on my brother's 98 disco. Fuses are all ok (engine and passenger compartments). Where's the relay for the indicators? Thanks all.
Thanks for the replies guys. When the alarm is armed the signal lights flash like normal. It's just when the signal lights are activated (left or right), or when the hazards are turned on, nothing happens. Keep 'em coming!
Hmm...then I would look into the 'headlight' stalk, perhaps it is worn out. Happens to some, not others. Dont know why this would also prevent the hazard button from turning them on. But to me it seems the stalk (you know the thing you push up or down on the left side of the wheel to turn the indicators on) might be the culprit here...
Troubleshooting the stalk is pretty easy. Get out your ETM, look up the pinout for the connector and jumper the pins to see if the lights can be made to blink.
I wish I could remember the connectors/pinouts from the job I did last week-this is almost the same issue!
My stalk gives issues sometimes, and they don't work either....x2 on that. Then I get the air chisel out and a large pry bar, and they seem to come around.
Ed
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.