Search results

Is the sealant still good on the little rectangular boxes the hoses attach to? If you havn't, suggest redoing all of that.

Anyone have one of these?

My passenger seat back refuses to go forward. Doing some searching led me to the "pull the cable and insert into drill" method. So I pulled the cable out of the motor and started with the drill. Looked to be moving ever so slowly and then stopped. The cable runs from the motor, under the seat...

Thanks pm. I'll try removing the driveshaft and see if the vibration is gone. Could the rear radius bushing to chassis cause this? My driver side bushing is pretty loose

Interesting and easy fix hopefully, which I like. Will try that tonight and will check the shock bushings.

Good call but freshly lubed and not loose at all.

Good call but freshly lubed and not loose at all.

So I think something in the rear is slightly binding. There isn't any noise but more of a feeling while driving. It's almost like rolling over a slightly washboard road. It feels like it's coming from the rear. Nothing crazy and probably only something a long time owner would notice with their...

I did this exact thing in my 98 Disco. I used the link above for my swap, it's pretty thorough. Definitely swap the front cover. I think I used the gems front cover, intake manifold, crank sensor and oil pan. Change as many orings, gaskets etc etc as you can with the engine out. I used the 4.0...

Last summer I swapped the 4.0 out of my 98 Discovery for a Bosch 4.6. Used the Frankenrover website to pretty much guide me through it. So basically it is a 4.6 block and heads with everything else from the 4.0. She ran fine after it was all said and done except the head gaskets started to...

I am nearby in Raleigh and travel to NJ via 95 frequently. I can help out using the Rover underground railroad if need be except for the rack.

Picked up a Salsa Spearfish a couple years ago for relatively cheap. I think its a 2013 model with full suspension 29er that has handled everything I've thrown at it so far.

Messaged him last week. They are sold.

In for 2 like Ed said. Camping Friday and heading home Saturday night.

Wish I could have made this. Have been waiting for Anthracite since last year. Hopefully make the next trip. Anybody do the creek bed of horrors?

Wish I could have made this. Have been waiting for Anthracite since last year. Hopefully make the next trip. Anybody do the creek bed of horrors?

Scott and flyfisher, I have already tried both of your suggestions, thanks.

So the rear cargo door is stuck shut. I was able to open it 3 times by lifting the lock up and pushing from the inside. Now it won't budge at all. From searching it seems this spring is usually the culprit but it looks like it didn't break (it felt secure). Are there two? Does it appear...

My driver's window became stuck in the down position. I unplugged the switch in the console and plugged it into one of the other switches and it worked. Hopefully it's that easy for you.

I found out a rock flying from another truck trying to get through some loose gravel will easily remove the driver side and then a wild tree out of no where will take care of the other side.