Search results

I thought I would relay this to whomever is interested....I recently installed a coil spring and shock conversion on my 06. It has the V6 and this was the one thing that Atlantic British thought could be a problem when they developed the electronic module that essentially replaces the original...

I have owned two '99 Disco I's and accumulated a number of parts that were never used. Many will fit most year models and even RR Classics. New items (4) O2 Sensors (#AMR6244 / NTK #25044), Fits ?97-?99 w/AEL System, New in Box - $250 for the set. (1) Exhaust manifold stud, fastener and...

Moving on to my next project..... -Rare Woodcote Green -No sun roofs -99,464 miles - and still purrs like a kitten -Complete top end job (new heads, gaskets, water pump, plugs, wires) 7K miles ago -RTE 2" - springs and shocks -Skid plate with jack points -Fresh brakes and rotors -245/75...

Not that I care but it is sort of an American icon. Great....and the Indians own Land Rover. What's the world coming to?

http://dallas.craigslist.org/dal/ctd/1035936506.html It's such a small world I thought this might be a good place to ask if anyone knows this vehicle?

Are the rear caliper pistons the same diameter for right and left? I found a source that indicates the left rear is 41mm and the right rear is 45mm. Is this correct?

Out of frustration over a little thing like a stupid plastic radiator plug (and four Rovers later), I have finally decided to pursue a real solution at a reasonable cost and would appreciate some feedback (oh boy, here we go). First, I wanted a plug that was obviously the correct thread (1/2"...

I don't know how many thousands of dollars I've spent on the four Rovers I've owned over the past 10 years but it is a bunch. I'm always on the hunt for good (not cheap) parts for less money which brings me to my question. Anyone here ever buy and have shipped from a UK source? With the...

Has anyone ever installed a pair of these to replace their crapped-out Denso's? http://store.summitracing.com/partdetail.asp?part=FLX%2D390&view=1&N=700+150+ If so, do they adequately do the job? I have no idea how much air the stock fans move.

Anyone have experience with reman transmissions or transfer cases from Roverland Parts in Florida?

Here is a nearly new (briefly used by dealer) wheel lock set LR p/n LRN50300. $74.00 shipped anywhere in lower 48 of US. PayPal.

OK, I'm stumped. I just bought a ScanGauge, got it hooked-up and all readings seem accurate....except that the speed it registers is 5-10% lower than my speedo reading. Even the tach is spot on. Wouldn't the OBD II port be connected to the same place (computer, ecu, etc) as the VSS? What's...

Does anyone know where I can buy the old style black lug nuts for RRC alloys? I think the p/n was NRC7415.

http://cgi.ebay.com/ebaymotors/RARE-5-SPEED-MANUAL-TRANSMISSION-1-OWNER-NO-RESERVE_W0QQitemZ130195130164QQcmdZViewItem?hash=item130195130164

This looks interesting...wish I had held off on that 99 D1 I just bought a couple of months ago. http://cgi.ebay.com/ebaymotors/RARE-5-SPEED-MANUAL-TRANSMISSION-1-OWNER-NO-RESERVE_W0QQitemZ130191874554QQcmdZViewItem?hash=item130191874554

Is Great Basin still in business? Looking to get prices on: Front DC d/s Rear axles Diff carriers All for my D1

I've searched and read some good information on the issue of worn-out ignition switches and possible fixes. I'd like to re-visit the subject as we all know it's not if but when we all will have the problem. I especially like the idea of getting away from the problematic "keyed" switch and...

Well, I got my Grip 4x4 chains (#0141) ordered through Bill Burke. I had asked the question before placing the order about clearance issues and he responded back with "no one has given him feedback that the chains didn't fit stock tires for the LR3 or any other Land Rover." With the stock 18"...

I know the subject of O2 sensors has been covered quite a bit but here is some information that will save you money. Disco I models from VIN # VA350102 With AEL System (mid '97-'99) use four AMR6244 sensors. These are manufactured by NGK and are labeled with their brand NTK with p/n 25044. You...

I'm thinking about taking on the challenge of resealing my own transfer case. Has anyone here done this before? If so, how difficult is it? If I took it to a shop, they would likely get me for the 5-6 hours to r & r plus a couple more for the bench time. For that kind of money, a rebuilt one...