Does anyone have a pic of these things installed? I'm having a lot of trouble getting them lined up. Some idiot (me) took them apart, and now that I'm having trouble getting them installed I am second guessing that I put them back together correctly.
Thanks
My 2000 D2 has recently started to just die. I drove it to the store and when I came out it wouldn't start. After cranking for about 10-15 mins it fired right up and I was able to drive it almost all the way home. Just as i entered my neighborhood it died with no warning. It didnt run rough, it...
I have the new seal in hand, but I'm not completely sure how to replace it. I checked rave and the instructions are less than helpful. How should I remove it and what is the best way to get the new one in without the special land rover tool?
Thanks
Doug
I purchased these and used them for about one week and one wheeling trip before I realized they were too short for me. I had some custom ones made and these have been sitting in my garage for about 3 months now...
I have 5 BFG mud terrains for sale. One is unused and the other four are about 70-80 tread left. I have used them offroad and there are a few small gashes in the sidewall, nothing structural and I have taken pictures of the cuts. They balance very well and show even wear.
Looking for $600 local...
I moved up to the 4.5 in lucky 8 springs and now need to get rid of my RTE 3 in springs. I bought them used and drove them for a few years, but they seem to be just fine. Located in northern va. I can get these to the conclave if someone wants them. Looking for $250
Thanks
Doug...
I have a front and a rear stock geared Arb locker for sale. They are the newer Arb rd128 locker. They both have the "new" bulkhead fittings. Located in northern va. I will not be at the conclave, but can get them a ride there if needed. Asking $1500 but open to offers.
Thanks
Doug...
I installed a set of Ashcroft axles and cv's on my D2 a few months ago. I'm currently trying to swap out my third members and it is a really big pain In the ass that I can't pull the cv through the knuckle with the boot and clamp still on. So is there an easier way than clipping the cv band and...
Two weeks ago at Rausch creek I bent my lower rear shock mount. Last weekend at the cove I basically flattened it against the axle. What are my options for repairing/reinforcing it? I'm not opposed to cutting them off and welding something better on, but I'm not sure what my best option might...
I have a buddy interested in buying a disco. I told him to register here to research some trucks. When he tried to register and it said that registration was disabled by the administrator. Anyone know anything about this? Is discoweb officially closed?
I need to raise my shock towers, and obviously that means I need to relocate my coolant reservoir. My under hood space is at a premium because of all the other shit I have stuffed under there in the past few years. Do I have to use the stock reservoir, or can I buy an aftermarket one that is...
I put in the switches for seat heaters I understand I need to put in the corresponding fuses to make them work. Anyone know where the fuses go and what amp I should use?
I am currently collecting parts to put some 35's on my 2000 D2. Have any of you guys used 35's with a Greg Davis rear bumper? I know I will have to trim my wheel wells and possibly my sliders, but I really don't want to modify my rear bumper. Any ideas if they will fit?
My rear brakes have worn out faster than my fronts on my previous 2 sets of pads and rotors, and my rear passenger seems to be wearing out the fastest. This seems counter intuitive to me. I know the fronts provide the majority of the stopping power.
Is there anything I should look for that...
Does anyone in the northern Virginia area have an Abs amigo they would like to loan out? I have a friend looking at a D2 with intermittent three amigos that I would like to check out before he pulls the trigger.
I put in a set of new Arb lockers. After a weekend of wheeling I have diff fluid dripping down my rear passenger tire. I assume it is the o-ring on the axle(which I did not replace). Is there anything else I need to check for /order before I try to fix this.
Thanks
Doug
Im working on wiring up some in cab winch controls. I want to use the blank spaces on my steering wheel surround. I have three switches one is on/off and the other two are momentary on (I think). I haven't had any
luck figuring out how to wire them up. Does anyone know which pin does what...
After a tough weekend at the cove with a bunch of defenders my disco decided I was being too pampered and decided my AC should no longer work. The air still comes out ice cold, but the fan no longer turns on. Since it initially stopped it has randomly kicked on several times.
I'm hoping it is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.