Search results

About 2 1/2 years ago I put new cats in my '96 disco. I didn't buy the Y pipe direct fit, but did a Marc O. Weld in. Well I have around 3k miles on them and I'm getting P0125 and P04020. (02 and a Cat). What gives? Anyone else have bad experience with doing there cats this way? BTW- had to...

My disco has been sitting for roughly 9 months without running. I have been working out of town quite a bit and have not had the chance to replace the starter, but will be getting to it here shortly. May be a bit of an odd question, but is there anything I should do prior to starting her up...

So after two years of replacing the master cylinder and bleeding the brakes every couple of months I'm done with this hydroboost system. I picked up a stock vacuum boost/MC from a '98 an will lost likely replace it this next week. So hears my problem, For some reason the stem that comes out...

I have a pair of Curry Jointed Rear Links from Rovertym/RTE-FAB. These have been sanded and repainted with a heavy epoxy primer and an elastomeric two part urethane for durability and they have not been installed since I painted them. These do include both grease-able joints, however- one is...

So I picked up a 1994 Discovery as an accessory donor for my 96. I dont really have the place for a parts vehicle and because this thing is in such great shape, I would prefer to sell it. The service records on this thing for the past 5 years is over 7k! :eek: Very few leaks, great body with...

Looking for a non-memory seat wiring harness for a P38. There seems to be plenty of memory seats out there. :( Thanks!

Looking to put the RRC front seats in my Disco. Looking to get the whole seat set up with plastic trim and all. PM me if you got 'em or you know where I can get a set. Thanks!

EDIT: RESOLVED. PROBLEM: ME BEING A JACKASS. 1996 Disco, Died on the wife. Got the Optima Battery recharged and its showing 12V. It wouldn't crank so since this one has the original starter I decided to put in a new one. After spending a couple frustrating hours replacing the starter it...

Long story short, I bought Lanes old Hydroboost brake conversion parts, installed and havent ever worked right. Bought a new master cylinder... Installed SS brake lines... Using Defender Rotors (DBA I believe) with Bill at GBR's caliper spacing kit... I've been fighting the brakes for over a...

Posting is for my bro (from my phone so please excuse any errors) 1999 D1 newly rebuilt motor with 4.6 kit from mark at aluminum v8. Previously the engine was overheating fast which ended up being air in the system. Suddenly when he went out to start it there is no oil pressure. Both the oil...

Not mine, but thought I should put this out there in case someone locally is looking: http://www.ksl.com/index.php?nid=218&ad=17613186&cat=&lpid=&search=land%20rover

Not mine but looks like a good deal if you got a D2. He's asking $1,000 Found here: http://www.ksl.com/index.php?nid=218&ad=17336954&cat=&lpid=&search=land%20rover

Kind of stumped here. 1996 Disco with 170k miles. Recently its had trouble starting when you turn the key there is about a 3sec delay before the engine cranks over. After that the ignition will crank as you turn the key and about the 3rd time it will start. (I read a few posts that had this...

Duplicate. Please Delete.

1999 D1 Recently rebuilt block that was running fine for a couple months until the temperature started to rise quickly. Vehicle will gradually reach 220-225 while idling (tested via OBDII and mounted gauge, both reading the same temp). Note: the temp gauge on the cluster must not be working...

1999 DI 126,000 miles. This is my brothers rover who recently rebuilt the motor with a 4.6 kit from Mark at aluminum V8.com. For the past two months we cannot track down this p0340 code. The truck is not having misfire codes and runs fine. Even took it to a local Rover Only mechanic who's only...

1999 Discovery 1. Had a different truck earlier this year with a problem with no power to the fuel pump, but now I've got another vehicle with different symptoms. Heres the skinny: Truck died outside of the gas station. Will crank over but does not turn over. - No Fuel Pressure - Has...

Does anyone know of an aftermarket top radiator plug for the D1? Mine blew out today and I am having a hard time tracking one down. Even the dealer has the stupid things on backorder. If anyone knows of where I can get a replacement that would be great. I need to get this thing back on the road.

I am looking for the rear AC line that goes underneath the rear drivers side wheel- well. Just another thing wrong with this land rover. My brother talks me into getting one and after three months of chasing things down I still haven't been able to take it out. :( If you got one, please PM me...

Hi, I just bought a 1996 Discovery from a friend of mine that is not getting power to the fuel pump. :( There is zero fuel pressure. It does turn over and I am getting spark. The guy I bought it from (who also recommended me to this site), said he was on his way back home and stopped at a gas...