Search results

Time to sell my 98 D1, 50th anniversary edition, shit's fancy. Most of you are going to hate my truck, that's cool with me, keeps the thread up near the top. Front suspension, all custom radius arms, cromo heim joints, SAW 2.5" coil-overs, SAW hydro bumps, trussed axle with a full sewer cap...

Time to sell my 98 D1, 50th anniversary edition, shit's fancy. Most of you are going to hate my truck, that's cool with me, keeps the thread up near the top. Front suspension, all custom radius arms, cromo heim joints, SAW 2.5" coil-overs, SAW hydro bumps, trussed axle with a full sewer cap...

Bought this from a buddy 6 months ago thinking I'd run it until I got around to building my own, now 6 months lather it's been moved around the garage 75 times and that's about it. Brand new, never attempted to install it. $250, save yourself $50, and if you're local, another $40-50 in shipping...

Buy some parts! Best way to get ahold of me is via email, MaxYedor@aol.com 1 pair of Fox 2.0x10" shocks, valved perfectly for the front of a Disco1/2/RRC/Defender, and damn close to what the rear should be at, if you keep a light load in the back, they're golden, these are the same age as the...

First is a pair of Hella Rally 4000 Euro beams that have been converted to HID, they come with the lights, white stone shields, ballasts, a set of 3000k bulbs (great for cutting through dust) and a brand new set of 6000k bulbs (damn close to daylight white). These are every bit as bright as the...

Selling pretty much 1 of everything. Local pick-up in Thousand Oaks CA. prefered, but I can ship most stuff, and have anything else delivered to RR9 or 10 or whatever number it is on the 24th of this month. All prices OBO, need all of this stuff gone ASAP, if you're willing to come pick it up...

This is the wheel, air-bag and wiring harness for each that came out of my 98 D1, airbag was replaced after the PO got in an accident in early '05, looks brand new. The wheel I believe to be the original one, I'd say it's a 9 out of 10, nearly perfect but has just the slightest sun damage on the...

Have some sets in stock that need to find a new home before I scratch up the paint moving them around again:banghead: Currently have 3 sets for a D1/RRC/Defender90 and 2 for a D2 These are the .250 wall DOM tie-rods and drag links I've been making, they run a 3/4"" heim at each end which is...

Have some Fox 2.0 shocks with remote resivoirs, these are the Inland Rovers custom valved jobbers, and are in about an 8 out of 10 cosmetic condition, and 9.5 out of 10 functionaly. Only real flaw worth noting is there's some slight pitting on one of the shafts. They come with the misalignment...

I'm putting together my spare-parts package for chasing the Baja 1000 and need some bolt sizes. Looking for the specs on the bolts that hold the rear upper shock mounts to the frame, and also the rear RTE upper shock mount bolts that go through the eye of the shock, I know they are 1/2"x13TPI...

I have a bunch of little things lying around that need to go. Everything is in Ventura CA, I don't mind shiping either as long as you pay for it, and if you are going to be at the SCLR/NCLR Pismo run you can pick the stuff up from me there. First is a Warn battery isolator (120 amp version)...

Lately I've been thinking that maybe the Disco doesn't have enough sunroofs, think I found a solution to the problem too..... http://cgi.ebay.com/ebaymotors/Sunroofs_W0QQitemZ260148596999

Looking for some Rally 4000's either the older style or the new FF4000s are fine, must be black and either pencil or Euro beam pattern would work. Also looking for a pair of Rally 4000 compacts. Let me know what you have and what you want for them.

I allready sewer-caped my rear and now it's time to do the front. My question is, will it fit? It looks like the panhard bar is too close and will hang up on the cap under compression. I'm using half the pipe-cap as a weld-on cover if that makes a difference clearence-wise.

OK, it's time for a dual battery set-up. I beleive an isolator is what I need, but none of the idiots at 4WheelParts could explain quite how they work, neither could the guys at West Marine or NAPA. If I understand correctly I hook up my alternator to it and then each battery individually, each...

Here is the TJM bumper that's been on the front of my truck for about 2 years now. It's kissed a rock or two in it's day, hell it's gotten to 3rd base with at least one rock and has the scars and a few bends to prove it. It should be pretty easy to straighten back out with a dead-blow hammer and...

This is a galvanised steel skid plate that protects the steering linkage on a D1 or an RRC. This thing has served me well, but it's time for a new front bumper with integrated skid, so it has to go. $125 OBO Here is a picture of what it looks like, I'll post some better ones when I get a...

Not a lot to talk about here, just a 24 spline D1 front diff (will fit Defenders, D2, and RRC) around 105k on it, works perfectly, spins smoothly, always lubed with syn. and replaced every 3k miles. Looking for $175+S/h but mainly need it gone, preferably withing the next two weeks. Also have...

Sometimes we give eachother shit for having a PVC pipe snorkel, limb risers or 2 sets of gauses, neither of wich is in the dash. But I think we can all agree that nobody has posted a Rover built as poorly as as these trucks, flip through all the pages, you'll be amazed and confused by what...

I have a line on a set of lightly used 3rd members from a D2 that I'm hoping to pick up for my D1. I know you can put a D1 front diff in a D2 with no problems, I've seen it done, but I want to make sure the D2 rear 3rd member will fit on my D1 and not cause any issues with the inner axels, for...