Search results

A friend of mine has a 2014 RR Evoque that had a low battery warning, then the HDC warn should up, followed by traction control shut down and ABS as well. And also lost the electric steering. So we replaced the battery with the new one, but the ALL those errors remains. Properly we need to...

The wiring to the D2’s coil pack is a 3 wires plug. The middle one is the 12v supply, but can someone explain to me what are the other 2 wires? Thanks, Ed

I have this Kit for the a secondary battery, but the provided wiring diagram only show the wiring for the 2 batteries, for the connection to the alternator, is it to any battery is going to be fine?

As for the D2 wheel hub we need to torque it to 490 Nm/ 361 ft lb, that need quite a big torque wrench do the job, do you guy buy one to do this specific work? What other work on the truck need to be torque to such high number? And how useful of owning one big torque wrench? I just have one goes...

Here is the problem, have done the shuttle valve wiring bypass, down with 2 error codes, Outlet Valve open circuit on front left wheel and rear right wheel. Clear it and keep coming back. Measure the ohms on all 4 wheels and they are all literally the same. The measurements are done even right...

I had already fixed the shutter valued, done the bypass wiring. Still have 2 issues, (1) left front wheel and right rear wheel have outlet valve open circuit error. (2) right front wheel have sensor electrical failure. I had already use the multi meter to check the ohm readings on all the...

I am trying to order the front and rear prop shaft for my D2, they are at the measurements of front-610mm and rear-855mm long. But my vendor said the front should be 625mm and 840mm, as my truck’s power plant is sitting far too forward. The mount are on slots so basically some adjustment on it...

I have a set of injectors at the rate of 150g flow rate and the resistance is at 14.5 ohm. If I be able to up size it by changing it to a set with 190g flow rate and with the resistance at 15.9 ohms? I understand the flow rate is higher but can someone explain the ohm reading?

I had heard about this from BMW's forum few years ago. From what I heard, it is a waterless coolant, and it does not expand when hot, therefore it does not pressurise the cooling system. A friend used it on his Mit. Evo III (old one), he claim it is able to keep the engine much cooler, even at...

Out of those 3, which one would you pick, 1& 2 are in the same price range, and 3) is 1/3 of neither 1 or 2. 1) 08 L322 Jag 4.2 SC Good power, good on road driving, best interior out of the 3, off road- you guys knows better. Worth pretty much nothing in 4-5 years. Link...

I kind of like it, but not cheap. http://www.dakar4x4.me.uk

Arrived at the vet at 3pm, decision made, need to put her to sleep, call my GF to get to the vet ASAP. Seeing the clock on the wall ticking, and her lying on the table breathing heavily.....such a strange feeling of whether you want the time to come or delaying it...... Just seconds before my GF...

Action start at 1min, I laughed out loud went it reach 1:36. http://www.youtube.com/watch?v=BuJt51ZsfEM&amp

Make sure the seat don't fall apart:rofl: http://www.appledaily.com.tw/realtimenews/article/international/20130228/168171/腳踏車座墊突裂開%E3%80%80金屬棒插入少年屁屁

...If I won the lottery... http://www.discuss.com.hk/viewthread.php?tid=21566607&extra=page%3D1

http://i.uwants.com/u/attachments/day_121028/20121028_c42e30f988d79b222950eUEFCfobPNCr.jpg http://i.uwants.com/u/attachments/day_121028/20121028_57f2934d421cb340ed32nBKPjTHSmxkU.jpg The guy need to get to the far left lane ( lane #1) to turn left, but he was on Lane#3( counting from the left)...

I am thinkint about this, the price is roughly USD300 here in HK, was looking at a makita earlier, but the price is pretty much double. So how are milwaukee's tools? Are they good or not...

Here is the situation, my girlfriend's laptop died, at lease it is the mainboard, so data in the harddrive is ok and that HD had becomes an USD HD now. And she got a desktop from her brother that he doesn't use anymore, but the desktop is just bare to win xp only, no ms office nothing, even the...

Needed help, when through a speed bump and the truck stalled and won't start, it won't even crank, just a click. Battery is good. Had the truck tow to a shop, seems like they haven't figure out the electric issue. They are able to hot wire the starter and start the truck, so there is fuel...

http://www.dartonfabrications.co.uk/16307.html I remember seeing their ads. on the LRM (UK version), took me a whole evening to look through all the issues and found the ads. I just sent them an email for ordering one, I guess the metal one will be better then the plastic one that will crack...