Bilstein 7100s
- Thread starter DiscoPhoto
- Start date
The on the shaft bumps won't work with the bils. It will break the wiper seal cap off. At least that's what I read on desert rangers iirc
Well after I get back from Conclave and MAR I'm going to give it a shot. If they don't work(likely) then Kyle is going to trade me for some 12" SBs.
Bringing this back up.
Anyways I ended up buying 4 12" SBs and storing them for winter(didn't want to ruin them with salt yet)
And long story short, I'm going to sell them and have 4 Fox factory series on order. The question I have is where should get the eibach shaft stops, and the tool to install them(shaft clamp).
Anyways I ended up buying 4 12" SBs and storing them for winter(didn't want to ruin them with salt yet)
And long story short, I'm going to sell them and have 4 Fox factory series on order. The question I have is where should get the eibach shaft stops, and the tool to install them(shaft clamp).
I guess I'll be going with these, http://www.polyperformance.com/shop/Eibach-Micro-Cellular-Foam-Shaft-Bump-Stop-p-1354.html
Not sure the shaft size, 7/8ths probably... FOX part number is 980-26-039
Not sure the shaft size, 7/8ths probably... FOX part number is 980-26-039
here ya go…I'd get a set for the shaft and shock body…
https://www.polyperformance.com/shop/Synergy-Shock-Soft-Jaws-p-24559.html
https://www.polyperformance.com/shop/Synergy-Shock-Soft-Jaws-p-24559.html
Thanks again Frank... I was somehow incapable of finding that. After removal you just slide the bump stop on and retighten? Loctite?
2 14" SBs and 3 12" SBs are for sale, $180 a piece + shipping.
Appreciate it Frank, I will try not to break anything...
Pretty much everyone has been running this valving with the 7100s on Rover applications, I'm certainly no shock expert though.
they are only 185 from eshocks, and you get their great customer support.
I have been 100% satisfied with 360/80 front.
I have been about 90% satisfied with 400/100 in the back. but there may be other factors.
No nitro adjusting. probaboly need to check them now...
I was about 20% satisfied with the poly bushings as they desinigrated on me. 1/2 bolts with a deep shank and the sphericals have been great though.
Yeah and pretty much suffering with the harsh ride they have. I have almost a decade on 7100's so what do I know ?