David Despain said:DAMIK! see what i mean. the cost of those tires and rack is probably more than what you paid for the whole thing. i can never find deals like those, and yet they seem to fall into some peoples laps on a regular basis. oh well. seems to me that tires/wheels and racks are usually not worth the added cost and hassle of shipping.
Rover Mac said:Wading has been one of my concerns with the air intake directly below the headlight, the door seals work well which is just as well for the BECM ( I now have a spare BECM and engine module just in case) The bonnet design makes a snorkel problematic, but I would be interested in well integrated and designed raised air intake to help the air intake in dusty desert conditions. (I have to use a shop vac on the air intake box after trips)
Rover Mac said:Change the BECM settings to Australian market to help minimize risk of BECM / security settings immobilizing your truck in the middle of no where
Rover Mac said:( I hate the smell of anti freeze from an aluminum block V8)
MikeD said:I see you got the window up too! Enjoy the parts.. i was just about over it until i saw photos of it again
David Despain said:what front drive shaft is on the "parts truck"? stock, GBR, tom woods ?
well with that much lift there had to be alot of vibration if the stock shaft was used so perhaps it has an aftermarket shaft (DC) to cure the vibrations.FIVESPDDISCO said:I dont know I have not put it on the lift yet. Why?
David Despain said:well with that much lift there had to be alot of vibration if the stock shaft was used so perhaps it has an aftermarket shaft (DC) to cure the vibrations.
then seeing as its a parts truck perhaps there will be a used shaft available cheaper than a new shaft?
FIVESPDDISCO said:I dont know why the tailgate is so much nicer to use then a door but it is.
FIVESPDDISCO said:If has a GBR shaft I will sell it. Fit it has a Tom Woods I will keep it. Ill let you know
Jeff, fuck the tea pot....look at that nice snap on screw gun!Nomar said:WTH, is that a teapot on the tailgate? Or just a really big coffee mug??
Oh, and I hope TF comes up with some better looking wheels... :ack:
seventyfive said:Jeff, fuck the tea pot....look at that nice snap on screw gun!
That's a whole different pelican case!Nomar said:Oh yeah, I thought that was one of Justin & Erik's *toys*...
seventyfive said:That's a whole different pelican case!
ArmyRover said:That is much larger and has a generator attached to power the "tools"
:rofl:
Jake1996D1 said:p-38 porn - this is the truck that made me want to build a p-38
http://youtu.be/gI8fC-P-f6U
Kam lockers, good lift, big tires, relocated rad..
dgi 07 said:Where can i find those bumpers....
FIVESPDDISCO said:Project update:
All we need now is a new shop girl for the install videos.