Search results

  1. Windycity_Rover

    Machine Shop - Chicago Area

    Can anyone recommend a shop in Chicago/Metro area to have heads resurfaced and a valve job done? I'm just looking for a reputable place and willing to drive a little if necessary. Thanks
  2. Windycity_Rover

    Electrical Issues / No Dash Lights

    I've searched and I'm leaning towards my headlight switch but would like any input DWeb could give. I keep blowing a fuse (F33 - 10AMP) :banghead: when I turn on my parking lights or headlights. I loose my dash lights, front parking lights and RH parking light in the rear. Radio still works...
  3. Windycity_Rover

    Tjm Install

    Could somebody clue me in.....On a DII install of a TJM is there any cutting involved or is it pretty straight forward. I drove my rig right through a support on a garage a friend was building. The upside:....I get rid of my factory bling guard (It took a good lick)....Downside: 1,200 damage to...
  4. Windycity_Rover

    Is my Tr**** Gone?

    Well my 01 DII was driving just fine until the other day. I was driving down Lake Shore Drive when I experienced a loss of power. I was driving about 50-55MPH in 3 when I loss power and had to hit the gas to keep my speed. The engine/drivetrain sounded like it was laboring just to get up a small...
  5. Windycity_Rover

    Dii Fog Lights

    These are off my 2001 DII. I'm upgrading to a TJM. The lights work perfect and I recently changed the bulbs. I have seen these lights sell on EBAY for over 200.00. These lights are in excellent condition. This Rover has mainly been a city cruiser until NOW! I'm asking 200.00 for the pair...
  6. Windycity_Rover

    Chicago Area Bodywork!

    Looking for a Chicago Area Shop for my DII. I recently had some front end damage ($3,000) and need a good shop. Insurance co. cut a check for that new TJM :D . Any input from chicago area guys would be appreciated. Thanks in advance
  7. Windycity_Rover

    Gps / Navigation / Topo Maps

    I did a search and couldn't find anything on this topic. I need some input on a good GPS system. I'm going to Mexico (Copper Canyon and Chihuahua Area) dropping down on the area from Chicago, IL. Does anyone have any advice on a setup? Thanks
  8. Windycity_Rover

    Code Question

    Looking for some general input. I just pulled some codes. I have PO174, PO340 & PO171. PO340 says a Camshaft position Sensor Circuit Malfunction. What do I do? Anyone know what needs to be done. It seems to be running fine.I recently changed the Serp belt added a new radiator and its running...
  9. Windycity_Rover

    New Battery

    Looking for some input on a new battery. THe interstate took a crap on me this morning. I was considering picking up a Optima red top or Exide. What model number is the Optima Red Top? I was at Optimas web site and they don't show anything for a 2001 DII? Thanks
  10. Windycity_Rover

    Radiator Problems!

    Just installed a new radiator and hose kit 2001 DII. THermostat is only a couple months old and was working fine. Filled up the system and the top hoses are getting real hot but the bottom are cold. Do I have an air bubble locking up the system or is my t-stat not opening. PLease advise. Thanks...
  11. Windycity_Rover

    Viscous Fan Problems, HELP!

    In the process of changing my radiator and I can't get the damn fan off (Changing my Serp Belt also)I rented the tools but where in the H-E-\_\_ does this second wrench go to hold the "pulley" Man, it's tight in there. I have the wrench on the fan nut but what do I attach the second wrench to...
  12. Windycity_Rover

    Blower Motor

    Newbie, here. Need some input. My blower motor started making an awful screeeeching sound from time to time. The heat has to be running for 5-10 minutes and it lets loose. Can something get caught in it? or is the motor going?? Any input would be great