Recent content by PaulMc0308

I sell the D2 pre-facelift main harness to facelift fog lamps adaptor harnesses, here on eBay - www.ebay.com/itm/151339497992 The reason you can't find them (or any of my other stuff) is because those @rseholes at eBay have been f*cking about about with their search engine and...

The LH switch uses a Green connector, the RH switch uses a Black connector - They're keyed differently and are not interchangeable. .

If the tell-tale LED in the switch isn't lighting in the 'on' position, that means that either there is no output live on switch terminal 4, or the switch is not properly earthed on switch terminal 5. Pop the switch out of the console, unplug the Green connector and, check that connector's...

.

There's this on eBay UK (ships to the US) - http://www.ebay.co.uk/itm/400541681977 100% Brand New! High Quality This is a brand new 2 button FOB with blank uncut blade It fits with cars of Land Rover Discovery 2 1998-2004 A perfect replacement for a key with broken buttons or just for...

Advanced Evaporative Loss fuel pump??? That uses a 4-way version of the AMP Econoseal III connector - http://www.autosparks.co.uk/product_info.php?products_id=1772 .

I believe that it's an AMP Econoseal III 6-way female connector. Available from Autosparks in the UK (as a male/female pair) - http://www.autosparks.co.uk/product_info.php?products_id=1773 (female connector on the left) .

The Lighter Socket is controlled by the Accessory Relay, which plugs into C282, in the Driver's footwell - To make it's circuits permanently live, you need to remove the Relay from C282 and jumper between terminals 30 and 87 - However, if you do this, you will also make permanently...

That's correct, they're all fitted with the same fog lamps. I'm selling Adaptor Looms that enable post-facelift front fog lamps to be plugged into a pre-facelift vehicle's harness - http://www.ebay.com/itm/160786700341 .

Yep, that's the ACE connector. .

Do you have ACE ? The connector for the ACE Upper Accelerometer is a Light Blue 3-way connector. As a rule-of-thumb, connectors that have foam wrapped around them are usually unused. .

Happy to have helped :) .

They're both AMP Econoseal III connectors. Your original one is a 3-way, your replacement one is a 6-way (with only 3 ways used). You could buy a new 3-way connector from an Auto-Electrical supplier. Alternatively (and more importantly - FREE), you could release the terminals from both your...

They are - SCREW, HEXAGONAL HEAD, M10 X 30 - SH110301L NUT - HEX., M10, HEXAGONAL HEAD, NYLOC - NY110041L See here - http://www.numcat.ru/landrover/p/32/45234/ Any M10 x 30 Screw (fully threaded) and M10 Nyloc Nut of the appropriate grade (8.8) is suitable. .

This gives details of how to do it and the bulbs you need - http://www.discopedia.info/index.php?title=Climate_Control Although, they do suggest a long-winded way of removing the AC unit :eek: Don't touch your radio or it's cage, remove the ash tray and coin tray to reveal the screws that...