Search results

Looking to replace the 4.0 (warped block) in my 98 D1. Anyone have a good 4.0 or 4.6 for a good price? Thanks, Dave

I recently picked up a new 98 D1 with a very stiff brake pedal. You have to push harder than normal to get it to stop. Pads are good, fluid was dark so I flushed and bled the system (which helped a little), but it is still harder than it should be (this is my second D1). I checked and there...

Looking for an AEL (1998 D1) fuel pump housing. It doesn't need to have a working fuel-pump. The fuel pump is brand new in mine and I can swap it in, but the exposed portion of the connection pipes are rusty and have sprung a leak. Dave

Wife got a new job so it seems in a few months I might be moving to the Salt Lake area.. anyone know of any local LR clubs out there? I searched Google and came up with bupkis. Am really looking forward to getting back out west (used to live in CO about 10 years ago and was a member of...

98 D1 No crank **FIXED** Hey all, been a while since I've posted.. was hoping to get some ideas as to what is going on. 98 D1 Auto trans. Engine will not crank over. No check engine light when I turn the key to on position. Good fuel pressure. No power is getting to the starter solenoid...

Looking for a 109 2 door tub and pickup top... anyone? Thanks, Dave

OK.. first off, I am at work and bored thinking about some plans I have for the 2a, so I figured I'd mosey on over to DWeb and see what opinions I might garner from people smarter than I am... Last weekend I was given a very good 89 RR rolling chassis. I have been wanting to go coil in my 2a...

Once upon a time, I really liked my job (software engineer). Was fun, challenging, etc. etc. Now I'm with a company that has turned me into a clock watcher. In at 7:59, out at 5:00 on the dot. I'm so bored, BORED BORED BORED! I even dread surfing the web anymore because there is nothing new...

https://host593.ipowerweb.com/~access-a/backcountry_petition/index.php

Fund Raiser for the Martinsburg Fire Dept. PROCEEDS GO DIRECTLY TO THE MARTINSBURG FIRE DEPT. WHAT: Trail ride for any 4WD vehicle* WHEN: June 2nd, 2007 -- 8AM line up WHERE: Martinsburg, NY COST: $70 per vehicle up to May 12th, 2007 $100 per vehicle after May 12th, 2007 $20 per...

finally a way to watch Top Gear here in the US... http://www.msnbc.msn.com/id/17422290/

Meaning: when an auto maker uses the 4HP22 in its car, do they change the engine to match the bolt pattern of the ZF or does each ZF have a different housing depending on where it is being used? I noticed that the ZF was used in everything from Lincoln Continentals, BMW, Rover, Peugeots, etc...

Anyone know what is involved in licensing an older (1970) vehicle in NJ that has a lost registration? I know when I built my 62 Rover and didnt have a registration, all I had to do in NY was take a pencil rubbing (or printed out pic) of the VIN plate and a bill of sale to the DMV and they...

My rear window defroster (and side mirror defrosters) has quit working. I cant seem to find a fuse for this... is it shared with something else or hidden somewhere? Or is it more likely just a bad switch? Thanks, Dave BTW, 98 D1

Hello all... I just failed the NY emission test due to a faulty ABS sensor (code P1317 if you are wondering). I checked the resistance of all the ABS sensors and one of the rears was showing very little resistance. The question is, both rear sensors are joined together in a wire loom then...

On my 98 D1 the headlight washer sprayer on the driver side is leaking fluid out (slow and continuous) as soon as I fill the reservoir. It will empty the entire reservoir just sitting overnight. Does anyone know if there is a check valve of some kind in the line or is it the pump itself that...

Out of the blue, my 98 Disco had a power loss. After some checking I found that my #1 plug was not getting any spark. Tested the plug wire (by swapping it with another wire) and it was fine, but no spark is getting to the plug itself. I tested the 2 leads that are hooked to the coil and...

no, not the tires :D ... the small round black thing on the back side of the front axle. I ripped mine off last time I was out and not sure if I need to replace it or not. I tried searching, but came up empty. Anyone? Thanks, Dave

Normally I save the off roading for my IIA, but last week I took the disco wheeling after work and now my tie rod looks like a pretzel and my rear passenger side control arm has a 30 degree bend in it. Anyone have a stock tie rod (preferably with a dampener as that got mashed as well) and/or a...

Fund Raiser for the Martinsburg Fire Dept. PROCEEDS GO DIRECTLY TO THE MARTINSBURG FIRE DEPT. WHAT: Trail ride for any 4WD vehicle* WHEN: June 3rd, 2006 -- 8AM line up WHERE: Martinsburg, NY COST: $70 per vehicle up to May 13th, 2006 $100 per vehicle after May 13th, 2006 $20 per...